Hi all,
my roll-channel is changing by more than 30% without stick movement. Even right after I calibrate my 9x (running openTX). It happens after i moved outdoor from 20° to 7°. Do anyone know this Issue? Did anyone find a fix for this Problem? Has the Taranis the same Issue?
Here is a Youtube Video i found which descries the same Problem. (klick)
Thanks,
AlexF.
Channel Value is changing without stick movements
Re: Channel Value is changing without stick movements
It looks like you have a bad pot on the aileron stick.
Some people managed to repair pots successfully..
What firmware are you using on your radio? still the stock? The reason I ask is that you can install taranis gimbals on the 9x radio, but it is only supported by the open source firmware as far as I know..
João
Some people managed to repair pots successfully..
What firmware are you using on your radio? still the stock? The reason I ask is that you can install taranis gimbals on the 9x radio, but it is only supported by the open source firmware as far as I know..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Channel Value is changing without stick movements
Also for some more info about your possible bad pot problem, see here: (viewtopic.php?f=95&t=2974) and (viewtopic.php?f=95&t=4281).
Some people have been able to repair this low quality pot.
But maybe better to upgrade to the Taranis Gimbals.
Bob B.
Some people have been able to repair this low quality pot.
But maybe better to upgrade to the Taranis Gimbals.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).