3D printed battery spacer for 3s 2200mah battery
3D printed battery spacer for 3s 2200mah battery
Greetings,
I am a new owner the 9XR Pro and the first thing I noticed was how poorly the recommended 3s battery fit. If you have this combo you know what I mean. I came up with a nice 3d printed spacer to ensue a great fit. Not sure of the rules on the forum here but if I'm allowed to, I can make them available to the community.
I am a new owner the 9XR Pro and the first thing I noticed was how poorly the recommended 3s battery fit. If you have this combo you know what I mean. I came up with a nice 3d printed spacer to ensue a great fit. Not sure of the rules on the forum here but if I'm allowed to, I can make them available to the community.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: 3D printed battery spacer for 3s 2200mah battery
To be honest I'm not sure about selling but if you're not a vender and more a hobby diy'er, it may be ok. I would think posting what it would cost you to make it to sell, would be ok. For details ask to have a private message sent for details. The forum and site admin may be ok with it all.
I'll ask because I'm curious, what would something like this cost to make own if I can't print it myself?
[emoji12]
SM
I'll ask because I'm curious, what would something like this cost to make own if I can't print it myself?
[emoji12]
SM
Re: 3D printed battery spacer for 3s 2200mah battery
The actual production cost is minimal. I'm just a hobby diyer. I can post the files on thingiverse for those that have access to a printer. If you had one printed via 3Dhubs or any other online service I'd say you be $15 or so. I can do it for much less. If an admin could pm me rules about offering these I'd appreciate it. Not looking to get rich, just mainly cover costs and contribute to the community how I can
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: 3D printed battery spacer for 3s 2200mah battery
I don't have an issue with any selling at a low comercial volume like this.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: 3D printed battery spacer for 3s 2200mah battery
Surely a piece of foam wrapped in tape would provide the same function for practically nothing nor any effort!
“A good politician is quite as unthinkable as an honest banker”
They used to say "if you don’t want to work at McDonald’s, go to college." Now they say "if you want to work at McDonald’s, go to college.”
They used to say "if you don’t want to work at McDonald’s, go to college." Now they say "if you want to work at McDonald’s, go to college.”
Re: 3D printed battery spacer for 3s 2200mah battery
@Bill +1!
That is, what I have here. I thought, that is not worth to talk about ....
It is just a piece of foam
That is, what I have here. I thought, that is not worth to talk about ....
It is just a piece of foam
Re: 3D printed battery spacer for 3s 2200mah battery
Since it's ok for them to be made available, I have added to my website for purchase. I also added a coupon code for the forum for free shipping. The code is 9XRPRO.
Turnigy 9XR Pro 3S Battery Spacer
Turnigy 9XR Pro 3S Battery Spacer
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 3D printed battery spacer for 3s 2200mah battery
Could be useful, but I couldn't use one because:
1. I still use NiMh cells.
2. Part of my battery bay is also occupied with a bluetooth module!
Mike.
1. I still use NiMh cells.
2. Part of my battery bay is also occupied with a bluetooth module!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 3D printed battery spacer for 3s 2200mah battery
Same here.. And at the moment I'm also testing some li-ion cels. Not very impressed with them at the moment, but might have been a bad batch from banggood..MikeB wrote: 2. Part of my battery bay is also occupied with a bluetooth module!
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 3D printed battery spacer for 3s 2200mah battery
I'd be glad to custom design one for your specific setup if you are interested.MikeB wrote:Could be useful, but I couldn't use one because:
1. I still use NiMh cells.
2. Part of my battery bay is also occupied with a bluetooth module!
Mike.
Re: 3D printed battery spacer for 3s 2200mah battery
Thank You received mine today very nice part !
Re: 3D printed battery spacer for 3s 2200mah battery
Very welcome.gatonini wrote:Thank You received mine today very nice part !