Hi
I'm just going to receive my radio tomorrow I have a couple question should I back up the origional software on the radio before flashing to r217. Also is it safe to turn the radio on without a module installed hasn't arrived yet ?
Thanks
Gary
New owner couple ?
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: New owner couple ?
There is no need to back up the original firmware. It is, in fact, r204 of ersky9x.
It is quite safe to operate the Tx without a module. The thing NOT to do is operate a module without an antenna attached.
Mike.
It is quite safe to operate the Tx without a module. The thing NOT to do is operate a module without an antenna attached.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: New owner couple ?
Thank you Mike !
Re: New owner couple ?
So I can just go ahead and flash the r217 ?
Re: New owner couple ?
Yes.gatonini wrote:So I can just go ahead and flash the r217 ?
Enviado do meu Galaxy S6 edge através de Tapatalk.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: New owner couple ?
Well my radio showed up today went ahead and flashed to r217 is there anything else i have to do to radio add new voice packs etc or am I done with flashing radio ? Thanks Gary
Re: New owner couple ?
Go here:
viewtopic.php?f=122&t=5680
and download the pack named "Voice Pack 9XR-Pro 16Khz.zip"
extract the zip file to the root directory of your radio's SD Card, and replace the old files.
You can also read this manual.. it is for er9x, not ersky9x, but the basics are the same, and there is good info to get you started with programming. Ersky9x only has a few more features.
viewtopic.php?f=5&t=6473
João
viewtopic.php?f=122&t=5680
and download the pack named "Voice Pack 9XR-Pro 16Khz.zip"
extract the zip file to the root directory of your radio's SD Card, and replace the old files.
You can also read this manual.. it is for er9x, not ersky9x, but the basics are the same, and there is good info to get you started with programming. Ersky9x only has a few more features.
viewtopic.php?f=5&t=6473
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW