Turnigy 9xr P2 and P3 trouble

Hardware Support for the 9XR
Post Reply
jeda007
Posts: 17
Joined: Sun Apr 24, 2016 7:29 am
Country: -

Turnigy 9xr P2 and P3 trouble

Post by jeda007 »

Hello!

i helped my friend with new firmware for his Turnigu 9xr, installed er9x -r818, is that wrong?

The problem is that the pot p2 moves curser upp/down in menus
And pot p3 Changes value!

This makes it not working to use pots! can i disconnect this funktion, or do i need to change firmware?

Searched for help on forum but with no luck!

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Turnigy 9xr P2 and P3 trouble

Post by jhsa »

You have potscroll ON. You need to turn it OFF.
I think it is in Radio Setup/General..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
jeda007
Posts: 17
Joined: Sun Apr 24, 2016 7:29 am
Country: -

Re: Turnigy 9xr P2 and P3 trouble

Post by jeda007 »

Hi!

Thanks! that was right medicin :-) but whe cant use P1,P2,P3 in mixer, value dosent change, is there anything whe have to turn on?

Whe used er9x-128.hex this would be working in this radio?
jeda007
Posts: 17
Joined: Sun Apr 24, 2016 7:29 am
Country: -

Re: Turnigy 9xr P2 and P3 trouble

Post by jeda007 »

Hi again!
I must have ben too tired, time to sleep it worked, loked at wrong channel :-( haha
Thanks for the help!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Turnigy 9xr P2 and P3 trouble

Post by jhsa »

;) :) It happens all the time, specially when trying to do stuff late at night.. :) :D

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “Turnigy 9XR radio”