Is there anyone in melbourne who can help me flash my 9xr to the standard 9x ,th9 type O.S
Thanks ,Josh
Anyone in Melbourne,Australia can u flash my tx
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Anyone in Melbourne,Australia can u flash my tx
I'm too far away but maybe you can do it.
Do you have a USBasp programmer? The files are posted you need and help to walk you through it is here.
If you give the 9xr FW a chance and ask for model setup help here you may like what you have. It does require some learning but files can be posted by others setup to do what you need and you can reverse engineer them. The eepe simulator function is a big help and you'll give that up with th9x FW.
Sent from my iPod touch using Tapatalk.
Do you have a USBasp programmer? The files are posted you need and help to walk you through it is here.
If you give the 9xr FW a chance and ask for model setup help here you may like what you have. It does require some learning but files can be posted by others setup to do what you need and you can reverse engineer them. The eepe simulator function is a big help and you'll give that up with th9x FW.
Sent from my iPod touch using Tapatalk.
Re: Anyone in Melbourne,Australia can u flash my tx
Have you actually tried or have an old transmitter that has the factory TH9 firmware on board? If you have and you can us it well, then the 9Xr isn't far removed on basic operations.
You don't have to be a scientist or some techy nerd to use the 9xr firmware. You can with the aid of Eepe on your computer, use the basic templates as a starting point and transfer what you do there to your transmitter. Given time you will get to know how to use it as you add things or modify settings. When you have got your head into it, you will not wish to go back to the regimented/restricted firmwares of the likes of JR, Futaba, Aurora and others.
You don't have to be a scientist or some techy nerd to use the 9xr firmware. You can with the aid of Eepe on your computer, use the basic templates as a starting point and transfer what you do there to your transmitter. Given time you will get to know how to use it as you add things or modify settings. When you have got your head into it, you will not wish to go back to the regimented/restricted firmwares of the likes of JR, Futaba, Aurora and others.
Re: Anyone in Melbourne,Australia can u flash my tx
This is your second THIRD thread regarding this so I'm pretty sure you wanna go back
If you had a working programmer it is possible.
Here is the original firmware.
http://openrcforums.com/forum/viewtopic.php?f=37&t=89
I have shipped over a dozen programmers to Australia this year but none to Melbourne. Did sell one to Edithvale a week ago, Wendouree a month ago. I could contact them and see if they can help or you can try a local flying club, or even an arduino club. You can reflash the radio with an arduino
If you had a working programmer it is possible.
Here is the original firmware.
http://openrcforums.com/forum/viewtopic.php?f=37&t=89
I have shipped over a dozen programmers to Australia this year but none to Melbourne. Did sell one to Edithvale a week ago, Wendouree a month ago. I could contact them and see if they can help or you can try a local flying club, or even an arduino club. You can reflash the radio with an arduino
Re: Anyone in Melbourne,Australia can u flash my tx
Thanks all. I have decided that the USBasp I have is faulty , I have ordered another and I will try it all again, I am learning it bit by bit I downloaded the original os. Yes I have the th9x radio already the frisky and turnigy 9x . I am using flymentor on some Helis as well which makes it harder again .
Re: Anyone in Melbourne,Australia can u flash my tx
I got the 9xr as I want to be able to use 9 channels , well mainly I want to be able to control flymentor on the 3 position switch , it's like a gyro , it goes from -100 to + 100 with zero being disabled, . I saw some flymentor discussions here so I won't be the first . I can only download the files at moment then open them and look at them on my computer . So until the new USBasp arrives ....... Thanks
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Anyone in Melbourne,Australia can u flash my tx
The radio only has 8 channels.
You can make it 9-16 if your handy with a soldering iron.
Sent from my iPod touch using Tapatalk.
You can make it 9-16 if your handy with a soldering iron.
Sent from my iPod touch using Tapatalk.