9x M64 PCB and some spare parts = Working Radio

Help and support for any other brand radios
Post Reply
User avatar
LTMNO
Posts: 1047
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

9x M64 PCB and some spare parts = Working Radio

Post by LTMNO » Mon Jun 25, 2018 1:52 pm

Hello All, not that this is any milestone or triumph compared to some of the brain power in this forum... just wanted to share a build that I just completed with some spare parts seeing that I didn't have a 9x Radio anymore and was my introduction into this forum many years ago.

Thanks to some documentation on the PCB Schematics, a Laser Cutter/Engraver, 3D Printer, some ingenuity... I have a working 9x Alternate Radio.

7x Switches (1x 3POS, 6x 2POS)
1x Push Button (monetary)
1x Pot
2x Stock Gimbals
1x Stock LCD
1x Stock LED Backlight (repaid the LED's)

I was able to remove the back-plain PCB, the Power PCB, no trims (not necessary for Quads) but can add them later if needed)
This all fits in a 40mm deep by 150mm x 180mm enclosure.
Screen Shot 2018-06-25 at 1.06.05 PM.jpg
IMG_1285.jpg
IMG_1284.jpg
IMG_1288.jpg
IMG_1298.jpg
IMG_1299.jpg
IMG_1296.jpg
The last thing that is printing now is the outer case... its a long print. Then just enclose the battery with charging port and internal XJT or URLS or other... The break out is already there on a 4-6 pin header with Telemetry.
Last edited by LTMNO on Mon Jun 25, 2018 6:03 pm, edited 2 times in total.
Custom 9x with M64/Telemetry Mod

User avatar
jhsa
Posts: 17811
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9x M64 PCB and some spare parts = Working Radio

Post by jhsa » Mon Jun 25, 2018 2:26 pm

Nice.. May I suggest the Multiprotocol module then?? ;) :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
LTMNO
Posts: 1047
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: 9x M64 PCB and some spare parts = Working Radio

Post by LTMNO » Mon Jun 25, 2018 5:17 pm

Hey Joao, yes... absolutely... its a funny thing as I was just researching that, no foolin... ;-)
Considering I only use FrSky for the most part but as long as I can get Telemetry and connect to my X and D Series Rx's and my VD5M.

Frsky (Based on CC2500 Chip) should do the trick with an Adruino Pro Mini.

Then I can just hardwire it on the inside and expose the button, led, dial to make changes.
Custom 9x with M64/Telemetry Mod

User avatar
jhsa
Posts: 17811
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9x M64 PCB and some spare parts = Working Radio

Post by jhsa » Mon Jun 25, 2018 5:37 pm

Or you can buy a module from banggood for example.. Go for the STM32 module.. All protocols fit in this one unlike the in the Atmega 328 based module..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “Other Radios”