Taranis - plus will not bind (EU LBT)
Taranis - plus will not bind (EU LBT)
I recently upgraded to the Taranis -plus, but it will not bind for love nor money.
It us the EU-LBT version and came with the X8R receiver. I also bought an XSR.
The same thing happens for both. When trying g to bind, is set for bind on Taranis, hold the f/c button on receiver and power up. Both red and green light cone on solid. I then disconnect power, end bind, then power on receiver. It then flashes red light (not bound)
I have tried updating all the firmwares, both EU and nonEU, still the same thing happens.
I've been trying g thus for days now and am ready to throw it out the window quickly followed by me jumping out the window.
If anyone has any suggestions I'd be eternally grateful.
Cheers
It us the EU-LBT version and came with the X8R receiver. I also bought an XSR.
The same thing happens for both. When trying g to bind, is set for bind on Taranis, hold the f/c button on receiver and power up. Both red and green light cone on solid. I then disconnect power, end bind, then power on receiver. It then flashes red light (not bound)
I have tried updating all the firmwares, both EU and nonEU, still the same thing happens.
I've been trying g thus for days now and am ready to throw it out the window quickly followed by me jumping out the window.
If anyone has any suggestions I'd be eternally grateful.
Cheers
Re: Taranis - plus will not bind (EU LBT)
This question has been posted for some time without anybody coming up with an answer.
I have the same problem with my newly bought Taranis. Could some body come up with a solution
I have the same problem with my newly bought Taranis. Could some body come up with a solution
Re: Taranis - plus will not bind (EU LBT)
If you are certain that the module and receiver firmwares match and that you have the internal module on in D16 mode, only a defective part would cause that. If you have 2 receivers and none work it is most likely the radio, return it for warranty repair/exchange.
Re: Taranis - plus will not bind (EU LBT)
Have you tried flashing the both the TX and RX with International firmware
Re: Taranis - plus will not bind (EU LBT)
March 2017 and I have the same problem. Green and Red light when binding and non way to bind. I have two receivers I bought at the same time as my radio, and they are bound and work. I bought an RX8R by mistake, but I guess the bind procedure is the same. I upgraded both the OpenTX to version 2.1.19 and the Taranis software to 2.0.9.2. EU versions. I then upgraded the firmware in the RX8R to the latest version (170117). But still no way to bind. I am afraid that my two original receivers has stopped working, but who makes such crappy firmware that is not backwards compatible?
Next is to flash with international firmware on both radio and recievers. I already spend several hours on this. I am also minutes from throwing everything in the trash and going back to my Spectrum where everything works with no firmware upgrades ever.
Next is to flash with international firmware on both radio and recievers. I already spend several hours on this. I am also minutes from throwing everything in the trash and going back to my Spectrum where everything works with no firmware upgrades ever.
Re: Taranis - plus will not bind (EU LBT)
As the thread suggests you didn't need to touch anything of that, just flash the RX8R to the same international/EU standard as the rest of your gear.
Re: Taranis - plus will not bind (EU LBT)
I found in another forum that you should upgrade both OpenTX, the FrSky Taranis and apparently the internal transmitter or JXT. I upgraded with the JXT firmware 151223. Now it works with the new receiver all EU firmware. But 4 things had to be upgraded before working. OpenTX, Taranis "OS", JXT and reciever for all the things to be able to communicate.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Taranis - plus will not bind (EU LBT)
Hi nivS1978,
I think you mean the XJT module and so XJT firmware.
Bob B.
I think you mean the XJT module and so XJT firmware.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Taranis - plus will not bind (EU LBT)
Hi im having the same problem. If the rx be it a x6r or x8r are set in bind mode with failsafe pressed without going in to bind on the taranis would i get solid red and green lights. I also am stood on my window ledge ready to jump.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Taranis - plus will not bind (EU LBT)
Click on photo to zoom in to view Binding Procedure, it gives what the LED's light colors should be:
What Binding Mode are you using ?
Bob B.
Most of the time I use Mode 5 when binding (no jumpers).What Binding Mode are you using ?
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).