Hello,
I've bought this radio few day ago. I successfully bind it with my Phantom 2. Everything works just fine, beside one thing. In telemetry page I have "NO DATA" blinking and there is no icon of RSSI in the left top corner. I have the second X8R and tried with it - no changes. Is this matter of settings or the radio is damaged?
Screens from companion:
Telemetry problem - Taranis X9D + X8R
-
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: Telemetry problem - Taranis X9D + X8R
You haven't set up telemetry on the "telemetria" page. You won't get the telemetry until you tell the Tx what the the signals it's receiving from the X8R are for.
Re: Telemetry problem - Taranis X9D + X8R
Thanks for quick reply. Yes, I understand that (I think I understand ). But what about RSSI? According to this tutorial below, the icon should appear right after binding. In my case it is not happening and the telemetry page in Taranis is empty and "NO DATA" is blinking.
http://youtu.be/1IYg5mQdLVI
http://youtu.be/1IYg5mQdLVI
Re: Telemetry problem - Taranis X9D + X8R
Maybe someone will have the same problem. My radio has been replaced, because of the fault. Now, in the new radio, RSSI is shown right after binding.