Fail safe DJI assistant and Taranis
Fail safe DJI assistant and Taranis
I have my fail safe setup on switch "SF" on the Taranis for my TBS Disco and also my X4 650MM quad. I can flip the "SF" switch and with it connected to the DJI assistant program it goes into fail safe but the throttle does not more. But when I turn off the tx it goes into fail safe according to the assistant program and the throttle will go up to 50% that's doing the fail safe this way on both quads.When I set the fail safe up on the x8r rx I moved the throttle to 50% before setting fail safe binding.
Re: Fail safe DJI assistant and Taranis
How are you setting failsafe on the receiver? What receivers are you using?
Sent from my LG-D801 using Tapatalk
Sent from my LG-D801 using Tapatalk
Re: Fail safe DJI assistant and Taranis
DJI controllers don't care where the throttle is once the "U" channel tells them to enter failsafe.
Re: Fail safe DJI assistant and Taranis
Why do they call it failsafe? if it was induced, it didn't fail
Sent from my GT-I9195 using Tapatalk
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Fail safe DJI assistant and Taranis
You set the receiver's failsafe to put the U channel in the "failsafe" range so the controller knows link has been lost, and initiates automatic return to home and landing.
As it's just a particular position on a channel it means you can of course also trigger it yourself should you want to.
As it's just a particular position on a channel it means you can of course also trigger it yourself should you want to.
Re: Fail safe DJI assistant and Taranis
My fail safe has been set and works after binding to x8r to the taranis x9d. Why they call it fail safe who the hell knows. I have fail safe set to a switch "SF" and when its pulled forward fail safe kicks in but the throttle on my quad does not move to 50% according to the dji assistant software. If I turn the tx off the fail safe kicks in and the throttle moves to 50% according to the dji assistant. I was wondering why it did not do the same thing n\by moving the "SF" switch forward. The tx needs to be set at 50% throttle when fail safe kicks in or it will drop like a rock.
Re: Fail safe DJI assistant and Taranis
Set an extra replace mix on the throttle channel that moves it to 50% when switch f is pulled.
Sent from my LG-D801 using Tapatalk
Sent from my LG-D801 using Tapatalk
Re: Fail safe DJI assistant and Taranis
I repeat, the dji controller does not care where the throttle is when fail-safe is activated. But if you really want it centered anyway then yes you'd do that.
Envoyé de mon SM-G900F en utilisant Tapatalk
Envoyé de mon SM-G900F en utilisant Tapatalk