Hi, becoming very frustrated !!! When I load the taranis in bootloader mode it shows version 2.1.6 and when connected to the pc's usb just shows 'usb connected' on the taranis screen. The pc doesn't register the taranis as connected!
I have loaded opentx ver. 2.2.1 on the SD card via a card reader and can see the files in Windows Explorer, but there's nothing in the Firmware folder.
Opentx Companion cannot write firmware to TX because the usb connection isn't working! I understand the Firmware version has got to match on both the TX and RX (X8R) EU version, but can't because usb connection isn't working !!!!! HELP! please.
PC connection to Taranis x9d plus failure
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: PC connection to Taranis x9d plus failure
Make certain the USB cable you are using supports data transfer, some cables are "charge only".
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!