Internal and External module to same Rx

Hardware help and support for the FrSky Taranis
Post Reply
Brodo
Posts: 2
Joined: Thu Jan 25, 2018 12:39 pm
Country: -

Internal and External module to same Rx

Post by Brodo »

Hello,
I was wondering, It is possible to bind a receiver such as the XSR both to the internal RF module of the taranis and to the XJT module?
If yes then will be possible to use the two modules to send the same channel?
In this way you have a diversity module on the taranis

Thanks

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Internal and External module to same Rx

Post by Kilrah »

No.
Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Internal and External module to same Rx

Post by Daedalus66 »

Each module has a unique ID number. A receiver can bind to only one ID number at a time. Hence a receiver cannot be bound to two modules.
Brodo
Posts: 2
Joined: Thu Jan 25, 2018 12:39 pm
Country: -

Re: Internal and External module to same Rx

Post by Brodo »

So I should do that by using an r-xsr with another rx connected than each tx module is connected to one rx
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Internal and External module to same Rx

Post by Kilrah »

Yes.

Post Reply

Return to “FrSky Taranis radio”