Taranis Q X7 Right Gimbal Not Straight
Taranis Q X7 Right Gimbal Not Straight
The right gimbal leans to the right about 5º when centered. The springs are set to max tension and the software registers it as 'centered', but it off to the right slightly.
I don't see any adjustment screws inside to correct this.
Any ideas?
Thanks.
I don't see any adjustment screws inside to correct this.
Any ideas?
Thanks.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Taranis Q X7 Right Gimbal Not Straight
You may need to recalibrate your sticks and pots, look for the Calibrate screen.
See here: (https://www.youtube.com/watch?v=OKbxZMLrUJA).
Bob B.
See here: (https://www.youtube.com/watch?v=OKbxZMLrUJA).
Bob B.
Last edited by bob195558 on Tue Jul 11, 2017 12:17 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Taranis Q X7 Right Gimbal Not Straight
The gimbal itself is not straight, as the title of the topic says.. Nothing to do with calibration..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Taranis Q X7 Right Gimbal Not Straight
If the gimbal's fit to the front case is improper then correct the fit by wedging it over or remove some material.
5º over a short distance is very small, maybe it is not a problem that needs to be fixed ?
Bob B.
5º over a short distance is very small, maybe it is not a problem that needs to be fixed ?
Bob B.
Last edited by bob195558 on Tue Jul 11, 2017 3:02 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Taranis Q X7 Right Gimbal Not Straight
Well, if I buy a new radio, I wouldn't like it to come with such a problem, even if it is "only" 5º
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Taranis Q X7 Right Gimbal Not Straight
is it the whole gimbal assembly thats not correct or just the stick???
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Taranis Q X7 Right Gimbal Not Straight
João, You would like the Taranis Plus much better.
Bob B.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Taranis Q X7 Right Gimbal Not Straight
Hi heliphil,
Without being able to take it part and seeing what is causing the 5º tilt, I can not guess.
If it is a problem for you (if new under warranty return it for a replacement),
take it apart to see if you can spot the 5º tilt cause.
You could then take pictures and post them here.
Could maybe be as simple as a piece of debris (dirt) between front case and the Gimbal.
Bob B.
Without being able to take it part and seeing what is causing the 5º tilt, I can not guess.
If it is a problem for you (if new under warranty return it for a replacement),
take it apart to see if you can spot the 5º tilt cause.
You could then take pictures and post them here.
Could maybe be as simple as a piece of debris (dirt) between front case and the Gimbal.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Taranis Q X7 Right Gimbal Not Straight
Negative Sir, I don't like any of the taranis, specially the first one and the plus. No encoder, terrible button placement among others
The only Taranis that could eventually appeal to me is the QX7. But why would I want a radio that is worse than the ones I already own?
I find my radios way superior than the Taranis Plus, apart from the bigger screen (my opinion of course). Not a biggie for me
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Taranis Q X7 Right Gimbal Not Straight
Here's some pics:
You can see the mounting in the frame is straight and flush, but the gimbal post itself leans to the right.
Here's the guts. It looks like there are two posts that rest on the tension bar and that determines vertical-ness. But I don't see any way to adjust this. Maybe I'm missing something.
It's annoying because the gimbal protectors don't sit right and I thought it'd be an easy fix.
Thanks for everyone's help!
You can see the mounting in the frame is straight and flush, but the gimbal post itself leans to the right.
Here's the guts. It looks like there are two posts that rest on the tension bar and that determines vertical-ness. But I don't see any way to adjust this. Maybe I'm missing something.
It's annoying because the gimbal protectors don't sit right and I thought it'd be an easy fix.
Thanks for everyone's help!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Taranis Q X7 Right Gimbal Not Straight
Hi dahai8,
Yes, I have never see an adjustment for what you want to do, on any Gimbals.
Here are some possible causes and fixes:
1. The Gimbal Stick Shaft maybe bend 5º.
a) Replace Gimbal
b) Bend Gimbal Stick Shaft back to 0º.
2. Piece of debris (dirt) between front case and the Gimbal causing 5º tilt.
a) Remove Gimbal from front radio case, inspect surface between Gimbal to Front Radio Case and clean and/or adjust to make proper fit.
3. Defective Qx7 Front Radio Case and/or defective Gimbal.
a) Warranty (return for replacement ?)
c) Not a big deal, just use it the way it is.
Without being able to look it over myself I am not able to think of something more right now.
Please let us know what you find or do.
Bob B.
Yes, I have never see an adjustment for what you want to do, on any Gimbals.
Here are some possible causes and fixes:
1. The Gimbal Stick Shaft maybe bend 5º.
a) Replace Gimbal
b) Bend Gimbal Stick Shaft back to 0º.
2. Piece of debris (dirt) between front case and the Gimbal causing 5º tilt.
a) Remove Gimbal from front radio case, inspect surface between Gimbal to Front Radio Case and clean and/or adjust to make proper fit.
3. Defective Qx7 Front Radio Case and/or defective Gimbal.
a) Warranty (return for replacement ?)
c) Not a big deal, just use it the way it is.
Without being able to look it over myself I am not able to think of something more right now.
Please let us know what you find or do.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 9
- Joined: Wed Jun 03, 2015 12:24 pm
- Country: -
Re: RE: Re: Taranis Q X7 Right Gimbal Not Straight
In my opinion the basis of the gimbal where the aluminium is screwed on is correct but the aluminium - part of the gimbal doesn't fit correctly. So it is possible the aluminium is bored incorrect.dahai8 wrote:Here's some pics:
You can see the mounting in the frame is straight and flush, but the gimbal post itself leans to the right.
Here's the guts. It looks like there are two posts that rest on the tension bar and that determines vertical-ness. But I don't see any way to adjust this. Maybe I'm missing something.
It's annoying because the gimbal protectors don't sit right and I thought it'd be an easy fix.
Thanks for everyone's help!
Gesendet von meinem GT-I9515 mit Tapatalk
Re: Taranis Q X7 Right Gimbal Not Straight
To me it appears that the base of the gimbal post is not horizontal with the gimbal assembly itself. So, yeah, could be a bad bore.
If what I think I'm seeing is correct, and there are no hidden adjustments, then the only way I see to correct this is to glue or tape a shim between the post and the tension bar inside the assembly. That's probably a bad idea as I can just imagine the mayhem that would ensue if it ever came off inside while flying my drone.
So, I think I'll just try to suppress my OCD and live with it.
Thanks again for everyone's input!!!
If what I think I'm seeing is correct, and there are no hidden adjustments, then the only way I see to correct this is to glue or tape a shim between the post and the tension bar inside the assembly. That's probably a bad idea as I can just imagine the mayhem that would ensue if it ever came off inside while flying my drone.
So, I think I'll just try to suppress my OCD and live with it.
Thanks again for everyone's input!!!