Taranis x7 wont bind

Hardware help and support for the FrSky Taranis
Post Reply
racer999
Posts: 15
Joined: Sat Oct 29, 2016 5:09 am
Country: Germany

Taranis x7 wont bind

Post by racer999 »

20170610_231038.jpg
Hi there
I got the new taranis x7.I flash with companion 2.2 for the german menu.
The flash runs without a problem.But after flash i got a warning somesthing wrong with the sd card.(picture)
I try a serveral firmwares on rx and for the internal modul.Can´t fix it to bind.
Can someone suggest me a firmware for both that works?
I got a X6R and some X8R Reciever.

Greetings Markus
20170610_231057.jpg

rdeanchurch
Posts: 750
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: Taranis x7 wont bind

Post by rdeanchurch »

The card warning ia just the version of the sounds file does not match what the system expects. The mostly likely symptom is something like Altitude being announced as degrees instead of feet or meters. Also some scripts such S6R can have updated functions.
Down load the correct SD to go with release 2.2, copy it to the SD and the warning will go away.
The file opentx.sdcard.version on the SD is all that gets checked to produce that warning message.

BUT ,,,,, It has absolutely no relation to binding.
Binding can work fine with no SD installed in the transmitter.

The bind issue is most likely to be that either receivers (transmitter) is the EU/LBT version and the transmitter (or receivers) item is FCC version.
That should only happen if you bought and transmitter from one source then bought the receivers from a source from a different company or another country.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
racer999
Posts: 15
Joined: Sat Oct 29, 2016 5:09 am
Country: Germany

Re: Taranis x7 wont bind

Post by racer999 »

I got it running!
I flasht on the internal XJT and on the receiver the stock EU Firmware.And then it works.
One Question now,the telemetry show me only the hole voltage of the fly batterie and not the singel cell voltage.
Is this normal?My old 9XR was abel to show it.
Thanks for help so far...
Greetings Markus
rdeanchurch
Posts: 750
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: Taranis x7 wont bind

Post by rdeanchurch »

What sensor for voltage. If you were previously using 2.0.xx you may not realize you have to set telemetry 'calculated' telemetry to get the indiviual cells.
Attachments
CalculatedValues.PNG
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
racer999
Posts: 15
Joined: Sat Oct 29, 2016 5:09 am
Country: Germany

Re: Taranis x7 wont bind

Post by racer999 »

Thanks for advise,now it was showing!And one last thing.
How do I get there that make an announcement at a given value?
For the flaps Position i make it on the switches.

racer999
Posts: 15
Joined: Sat Oct 29, 2016 5:09 am
Country: Germany

Re: Taranis x7 wont bind

Post by racer999 »

Alright,i got it found out.Everthing is fine now!

Post Reply

Return to “FrSky Taranis radio”