Qx7 setup on heli

Hardware help and support for the FrSky Taranis
Post Reply
Stutts
Posts: 1
Joined: Sat May 27, 2017 10:13 pm
Country: -

Qx7 setup on heli

Post by Stutts »

Got everything working except the elev will not work I'm using a microbeast and x4r Rx I set it up like the basic heli guide​ on opentx forum can someone help me with this
Thanks Donnie

michaelgriffin
Posts: 13
Joined: Fri Aug 03, 2012 1:25 am
Country: -

Re: Qx7 setup on heli

Post by michaelgriffin »

You don't use Heli cyclic channel mixing with the microbeast. The flybarless controller does the channel mixing.
You just need a basic four channel set up, but with gain control for the tail rotor. I changed my Beastx for the iKon. Same basic set up though...
Post Reply

Return to “FrSky Taranis radio”