help with my taranis x9d plus battery

Hardware help and support for the FrSky Taranis
Post Reply
Naresh9807
Posts: 2
Joined: Mon May 08, 2017 8:18 am
Country: -

help with my taranis x9d plus battery

Post by Naresh9807 »

i was charging my taranis the chraging light became solid green but when i turned the transmitter on i was 7.2 volts. i checked the calibration.it was also showing 7.2v so its fine. the nominal voltage should be 7.8volts. can anyone tell me why its happening like that?

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: help with my taranis x9d plus battery

Post by Kilrah »

Did you actually let it charge until the LED turns off?
Naresh9807
Posts: 2
Joined: Mon May 08, 2017 8:18 am
Country: -

Re: help with my taranis x9d plus battery

Post by Naresh9807 »

Kilrah wrote: Mon May 08, 2017 8:50 am Did you actually let it charge until the LED turns off?
no i dont i turn off as soon as it gets solid green. i basically baby sit it while charging
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: help with my taranis x9d plus battery

Post by Kilrah »

Solid green is when it STARTS to charge. When it's finshed it turns off... so you're not charging anything.

Post Reply

Return to “FrSky Taranis radio”