New M9 gimbals not calibrating correctly
New M9 gimbals not calibrating correctly
Wonder is this a problem with my X9D. I have just fitted the new M9 gimbals to my Taranis and calibrated them, Im using mode 2 and the right stick is perfect with the channel monitor showing everything as near zero as not to matter. However the left stick is showing 20% right trim on the rudder, Ive recalibrated 3 times with the same result. trying to find a solution I removed the centring screw off the throttle and that also shows 15% off centre. Both of these can be corrected using the trim switches but im left with very little trim on either stick. Has anyone any ideas or should i just return the offending gimbal?
Re: New M9 gimbals not calibrating correctly
Now this is really weird I've refitted the original gimbals and they are showing exactly the same problem even after calibrating. Certainly wasn't like this before. Sod's law sold my spare Taranis last week having never used it in 2 years.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: New M9 gimbals not calibrating correctly
All I can think of, is to recheck all your Radio Setup, settings.
Maybe, try creating a new model and see what you get.
Bob B.
Maybe, try creating a new model and see what you get.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: New M9 gimbals not calibrating correctly
Have you got some "sub-trim" set (under servos I think)?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: New M9 gimbals not calibrating correctly
thanks for suggestions guys,I had tried a new model and checked the subtrim but the problem persisted, decided to try one last calibration.Guess what saw the stick suddenly centre on the calibration screen. The only thing I did differently was to move the sticks separately one at a time rather than both together. Looks like another lesson learned! thanks for the replies.
Kevin
Kevin
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: New M9 gimbals not calibrating correctly
So when you recalibrated one at a time, your problem went away ?
Bob B.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: New M9 gimbals not calibrating correctly
Please confirm, that this solved the problem.
My M9 gimbals are on the way.
br
My M9 gimbals are on the way.
br