Throttle trim not working
-
- Posts: 3
- Joined: Fri Apr 28, 2017 12:42 am
- Country: -
Throttle trim not working
I can not get the throttle trim to work on one particular model. It works fine on other models, so I know it is not a radio issue. I have the trim turned "on" in the "inputs" screen, but when I look at the channel monitor, nothing changes when I adjust the trim. I can see the trim move up and down on the main screen, and it makes the corresponding sounds at high, low, and center, so I think the trim tab is physically working right. Any ideas would be greatly appreciated.
Re: Throttle trim not working
The trim can be disabled in the mixer as well.
-
- Posts: 3
- Joined: Fri Apr 28, 2017 12:42 am
- Country: -
Re: Throttle trim not working
I somehow (not really sure what I did) got the trim to work above center, but it is still not working below center trim. This is important to me because my plane has a sound card in it. I activate the throttle trim until the prop just start to spin, and this "starts" the engine sound. When I bump the throttle trim down, the prop stops, but the sound does not. I need just a little bit more (the sound card is not as sensitive as the ESC).
Thanks for your input!
Thanks for your input!
Re: Throttle trim not working
You can connect the sound card to a different channel if you have a spare one, with the throttle stick as source.
Then adjust it until it matches the throttle channel so the sound starts when it is supposed to..
João
Sent from my thor using Tapatalk
Then adjust it until it matches the throttle channel so the sound starts when it is supposed to..
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 3
- Joined: Fri Apr 28, 2017 12:42 am
- Country: -
Re: Throttle trim not working
That is a great idea. Why didn't I think of that. It still doesn't explain the throttle trim, but this is probably a better solution anyway. It will give me the ability to fine tune the sound independently of the ESC. THANKS
Re: Throttle trim not working
And if you use a curve on that channel you could really match the sound to the stick travel.
João
Sent from my thor using Tapatalk
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW