S6R PC configuration STK USB adapter

General Help and support for the Taranis Radio.
Carbo
Posts: 467
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

S6R PC configuration STK USB adapter

Post by Carbo »

The FrSky STK USB adapter has a dipswitch to choose between "flash" and "config". It is not yet available. Does anybody know, if the RS232 adapter (the one with a single diode) can be modded to be used for the configuration of the S6R with pc?

krashem
Posts: 39
Joined: Fri Jul 12, 2013 7:57 am
Country: United Kingdom

Re: S6R PC configuration STK USB adapter

Post by krashem »

It's available from T9HobbySport UK, I have 1 but not used it yet. Like you I'm waiting for the experts to evaluate it :)
Carbo
Posts: 467
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: S6R PC configuration STK USB adapter

Post by Carbo »

I did not order it, because i thought, i can use my smartport flashing adapter with the software, RTFM i know. Btw, what do want to evaluate? Dipswitch to config, plug it in, start the pc configuration software and start playing ;)
krashem
Posts: 39
Joined: Fri Jul 12, 2013 7:57 am
Country: United Kingdom

Re: S6R PC configuration STK USB adapter

Post by krashem »

I've not got the flying wing I intend using it in yet, I heard they are designed for fixed wing only. I'm up to my ears in another project at the moment.
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

krashem wrote:I've not got the flying wing I intend using it in yet, I heard they are designed for fixed wing only.
Bildschirmfoto89.jpeg

User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

Short description for STK USB adapter is out.
Attachments
Manual-STK.pdf
(1.04 MiB) Downloaded 512 times
krashem
Posts: 39
Joined: Fri Jul 12, 2013 7:57 am
Country: United Kingdom

Re: S6R PC configuration STK USB adapter

Post by krashem »

Thanks for the heads up Kalle,just have to get my grubby paws on one.
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

@ krashem

Unpacked and placed the S6R manual (10MB) and the software (14MB) (Win Gui and lua script) in my dropbox.
https://www.dropbox.com/s/r4rtmqcvnkzoc ... e.pdf?dl=0
https://www.dropbox.com/s/lfyoe6ayh2yvy ... R.zip?dl=0


If you are interested ;)
Now we have to wait for the hardware ...
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: S6R PC configuration STK USB adapter

Post by Kilrah »

Why not just link to the source i.e. FrSky's download page so that any future updates are taken into account??
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: S6R PC configuration STK USB adapter

Post by ShowMaster »

I believe the v 1.1 Config pgm has an led reference error in it. If It mentions the green led will blink when the calibration value is reached for each axis, It should say yellow.
The latest updated manual does reference to the yellow led now.
I can't look at the files with my iPhone to tell what's saved to your Dropbox, but you'll know when you run the pgm and read the manual.
I also don't think the s6r will bind in the D8 mode even though it's listed to be compatible with the D series tx modules.
XJT in D16 mode yes.



Sent from my iPhone using Tapatalk Pro
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

@ShowMaster.

You are referring to that here?
Bildschirmfoto16.jpeg
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: S6R PC configuration STK USB adapter

Post by ShowMaster »

Carbo wrote:The FrSky STK USB adapter has a dipswitch to choose between "flash" and "config". It is not yet available. Does anybody know, if the RS232 adapter (the one with a single diode) can be modded to be used for the configuration of the S6R with pc?
Yes for FW flashing, no for using the PC Config program.


Sent from my iPhone using Tapatalk Pro
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: S6R PC configuration STK USB adapter

Post by ShowMaster »

kalle123 wrote:@ShowMaster.

You are referring to that here?
Bildschirmfoto16.jpeg
Yes, what does it say in the running config pgm? If it says yellow, it's correct, green not.
I know it's been addressed and is or will be correct. Just a heads up to be sure you use the all latest releases.

About the stk. it's clearly laid out in its manual about what port to use and what position the tiny SW should be in when programming or flashing the stk. It's important to note the both ports use the pins at the center of the stk board for ground, and the signal is to the board edges. You need to make sure you don't reverse the 3 pin connector when using the 2 ports. No damage, it just won't work.
I've also found that if I start the Config program with the stk plugged into the USB port, select the correct com port, and then plug the 3 pin servo connector into the S6R's Sport, I have better first time programming or Config connection success.

I'm thinking with the release of the s6r and stk now happening, it's time for a dedicated thread to help us share learning curve solutions as we did/do with the Taranis and Opentx.
Maybe one thread, not dozens?





Sent from my iPhone using Tapatalk Pro
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

ShowMaster wrote:Yes for FW flashing, no for using the PC Config program.
I doubt that. ;) When I look at that pic here https://rcstudio.cz/en/accessories/271-frsky-stk.html
there is not much on that usb stick. Question is, what is on that stick and how does that config protocol looks like ...

But let me ask you one question. Taranis has to be on opentx 2.2.x to use S6R? It will NOT work with opentx 2.1.x?

br KH
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: S6R PC configuration STK USB adapter

Post by ShowMaster »

kalle123 wrote:
ShowMaster wrote:Yes for FW flashing, no for using the PC Config program.
I doubt that. ;) When I look at that pic here https://rcstudio.cz/en/accessories/271-frsky-stk.html
there is not much on that usb stick. Question is, what is on that stick and how does that config protocol looks like ...

But let me ask you one question. Taranis has to be on opentx 2.2.x to use S6R? It will NOT work with opentx 2.1.x?

br KH
To be clear, the FrUSB-3 with the diode mod will flash the s6r FW ok, just not connect to use the PC Config pgm. The FrUSB-3 is missing the parts and switch for that.

The FW 2.2 on 12s Horus allows a lua script to run for configuring (and maybe flashing?) the s6r without q PC. Good to have at the field.

Yes!
I understand there is a version of FW 2.2 Opentx that will run on the 9XD and Plus to allow the s6r lua Config to be used without a PC.
All this is advancing fast and may be a little fuzzy for early adopters of the s6r or 2.2 FW builds.
http://www.open-tx.org/2016/09/01/opentx-2.2.0RC1

I understand there's a lot of dedicated programmers and beta testers working on all this to make it happen.



Sent from my iPhone using Tapatalk Pro
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

ShowMaster wrote:I understand there is a version of FW 2.2 Opentx that will run on the 9XD and Plus to allow the s6r lua Config to be used without a PC.
To make it clear. Will it be possible to use S6R with its features (Gyro/Acc) in opentx 2.1.x, when doing the config with the STK USB adapter?

Using the lua configuration definitely requires opentx 2.2.x!
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: S6R PC configuration STK USB adapter

Post by Kilrah »

Normal usage needs nothing more than a couple of control channels to be setup.
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: S6R PC configuration STK USB adapter

Post by ShowMaster »

Yes to using a PC connection to modify the parameters via the Config pgm. I'm doing that now.
Yes to connecting in D16 mode with ch 1-6 +10,11,12 enabled.
10 is used for remote gain and 11-12 3 pos SW fir mode control and forced self check. I don't not have the ch order memorized for now but it's all in the documentation out there now.
I'm using a Taranis B wth FW 2.1 on the bench and its controlling the s6r ok. I'm in no way an expert, just going through all the released hardware and software/docs being released. I'm going to try FW 2.2 on my test B and then a plus to know what will work. FW 2.0 and 2.1 also as time permits. I'm sure the info will start flowing as more purchase the s6r and stk.
My testing has however not been able to bind to a D8 tx module or mode. I think that is a misprint? I'm sure a Xjt will bind, I'm just not sure how non Opentx or ersky9x os will enable or be able to used the 10-12 channels required? As a d16 receiver only I think ok.
You need the D16 mode to enable channels 10-12 to use the stabilizer functions in any case.
Again, just my findings open to corrections and updates.




Sent from my iPhone using Tapatalk Pro
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

Thank you both. Clears things up.

Another question. The S6R manual mentions "Built-in battery voltage sensor"

Is the the backside AD1 socket like on X6R? Heard on rcgroups, that the opening is there on S6R, but the pins are missing ....
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: S6R PC configuration STK USB adapter

Post by Kilrah »

It's the receiver supply monitor, no external port pins.

It cannot work in D8 mode, the relevant section of the manual is likely an unfortunate copy/paste error.
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: S6R PC configuration STK USB adapter

Post by ShowMaster »

Can the Sport be used for sensors? Haven't given that any thought since I was more focused on the many info mistakes that are being cleared up.
I would think yes?


Sent from my iPhone using Tapatalk Pro
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: S6R PC configuration STK USB adapter

Post by Kilrah »

Of course.
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: S6R PC configuration STK USB adapter

Post by ShowMaster »

Make sense since it's labeled Sport, I just haven't got to connecting any yet. Now to fly it!



Sent from my iPhone using Tapatalk Pro
pslewis
Posts: 7
Joined: Sat Oct 01, 2016 2:49 pm
Country: United Kingdom
Location: York

Re: S6R PC configuration STK USB adapter

Post by pslewis »

What drivers are people using for the STK adapter in windows?
Mine is using Silicon Labs CP210X USB to UART Bridge V6.7.3.0 (COM 13)
but when I try it in the config tool, I can only see (COM13) if I plug in the STK after running the config tool and then I get the error:
This serial port is not found or occupied or state change failed!
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: S6R PC configuration STK USB adapter

Post by kalle123 »

What Windows Version?

What other com ports are occupied on your pc?
pslewis
Posts: 7
Joined: Sat Oct 01, 2016 2:49 pm
Country: United Kingdom
Location: York

Re: S6R PC configuration STK USB adapter

Post by pslewis »

Hi

I am running, Windows 7 enterprise SP1 64Bit on my laptop

The only COM ports present at the time where physical Com1: and Com4: and Com5: used by my 3G modem

but I use RS232 quite a lot so there are quite a few serial ports reserved:
com.png
nobbyt
Posts: 3
Joined: Sat Oct 01, 2016 8:26 pm
Country: -

Re: S6R PC configuration STK USB adapter

Post by nobbyt »

I am trying to program my S6R with the STK lead and the S6R Config Software v1.2
It can read the RX through com5 ok
I can alter as reqrd but when I write this to the RX THE PROGRAM CRASHES.and shuts down.
Anyone else having this problem
Using Windows 10
nobbyt
Posts: 3
Joined: Sat Oct 01, 2016 8:26 pm
Country: -

Re: S6R PC configuration STK USB adapter

Post by nobbyt »

Can anyone tell me the correct way to bind the S6R to the Taranis.
I get a green light, then when pressing Taranis bind button red light flashes green remains solid but nothing else happens
pslewis
Posts: 7
Joined: Sat Oct 01, 2016 2:49 pm
Country: United Kingdom
Location: York

Re: S6R PC configuration STK USB adapter

Post by pslewis »

NobbyT, Although I can't use mine at the moment as I can't get the STK working to change the orientation I can bind to my Taranis X9D with no issues
When binding on mine the red LED flashes when they have bound and then when you power the S6R off and on and you get a solid green LED.
If yours wont bind I guess the first question would be is what Firmware are you using in your XJT module, if you have a European S6R you will need LBT firmware in your XJT or it will not bind. You will also need to make sure it is in D16 mode and outputting channels 1 to 12 not just the default 1-8.

Paul
Carbo
Posts: 467
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: S6R PC configuration STK USB adapter

Post by Carbo »

pslewis wrote:NobbyT, Although I can't use mine at the moment as I can't get the STK working to change the orientation I can bind to my Taranis X9D with no issues
Is it when you try to write the Mounting Type or the Accelerometer Calibration?

Post Reply

Return to “General help (FrSky Taranis radio)”