I have a small pop wing and am using the X8R reciever.
I go through the new model setup, select flying wing, assign the channels etc etc pretty simple just like any other plane. But no matter what I do the X and Y axis are swapped.
I.E. moving the right stick left and right makes both control surfaces move up and down, and moving the right stick up and down makes the surfaces alternate left and right up/down.
This is my 8th aircraft setup with the taranis, but the first flying wing. I have no idea why it is doing this.
Flying wing issue, X-Y axis swapped.
Re: Flying wing issue, X-Y axis swapped.
That's usual with flying wings - by swapping servo plugs and/or reversing one or both of the servos in the outputs page you should find a combination that gets it right.