Hello,
Can someone help to configure switch H that in one press it will set channel to 100% and at the next press it will return it to 0%.
Thank you very much for your help.
Rotem
SH switch to arm \ disarm
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: SH switch to arm \ disarm
It matters which version of firmware the transmitter is running.
So you need to specify a version number.
Long Press Enter, then scroll with Page until version number shows. 2.0.x or 2.1.y
So you need to specify a version number.
Long Press Enter, then scroll with Page until version number shows. 2.0.x or 2.1.y
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: SH switch to arm \ disarm
I use this setting.
Worked with 2.0.x and works now with 2.1.x.
Worked with 2.0.x and works now with 2.1.x.