First the web pages I have referenced so far.
http://johnprikkel.blogspot.com/2014/07 ... x.html?m=1
http://dustin.sallings.org/2014/12/25/t ... no-qx.html
Disclaimer.........
I am a noob to the Taranis and 2.5Ghz radios but not RC. I have done most of my flying on 72Mhz in the olden days.
Background information.......
My DSMX transmitter module is assembled as per the first link, using the module out of a DX4e. My model set up on the Taranis is as provided by the second link. I am currently running 2.1.8 firmware on my transmitter. The Nano QX flew and bound perfectly to the DX4e prior to removing the necessary bits for the Taranis module. At this point I do not have any other DSMX BNF aircraft or receivers to see if my problem is isolated to the Nano.
Here is my question/problem.......
I have to rebind the transmitter to the quad every time I power it up. Is this normal? It doesn't seem like it should be. Am I doing something wrong possibly? If rebinding is normal here is there a way to have the Taranis go through the bind process with the flip of a switch at start up?
Taranis and Blade Nano QX
Re: Taranis and Blade Nano QX
Never mind this post. Apparently it was a problem with the switch actuator, also know as pilot error, or that I am just a dumbass who saw problem when there was none.