Jeti tx Gimbal on Taranis

General Help and support for the Taranis Radio.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Jeti tx Gimbal on Taranis

Post by jhsa »

jonathanyeo wrote: Still need to figure out how to reverse the stick..so i dont have to change my channels and it is not so intuitive to work with reverse sticks.

Jonathan
The biggest problem is that the trims are correct and sticks are reversed. So, to trim to the right, you actually need to use the left trim.. That is bad.. :o

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

jonathanyeo
Posts: 82
Joined: Sat Nov 14, 2015 12:26 pm
Country: -

Re: Jeti tx Gimbal on Taranis

Post by jonathanyeo »

Sure Bob...should be working now.
Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Jeti tx Gimbal on Taranis

Post by Daedalus66 »

On the Quanum three axis stick with Hall effect sensors, you simply rotate the magnets 180 degrees to reverse action. In other words, reverse the magnetic polarity. I don't know if that's possible with your sticks.
jonathanyeo
Posts: 82
Joined: Sat Nov 14, 2015 12:26 pm
Country: -

Re: Jeti tx Gimbal on Taranis

Post by jonathanyeo »

Thanks Kilrah and guys,

https://youtu.be/eHfU6PZxp5o

All resolved. :D :D :D

Jonathan
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Jeti tx Gimbal on Taranis

Post by bob195558 »

HI jonathanyeo,
Your video says it is (This video is private.). :(
Not able to view it.

Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

jonathanyeo
Posts: 82
Joined: Sat Nov 14, 2015 12:26 pm
Country: -

Re: Jeti tx Gimbal on Taranis

Post by jonathanyeo »

ops video published.
pyrojets
Posts: 1
Joined: Fri Sep 08, 2017 5:05 pm
Country: -

Re: Jeti tx Gimbal on Taranis

Post by pyrojets »

I bought over Jonathan's radio that is flashed with a custom OpenTx 2.17 firmware. I was wondering if I can edit the same parameters on the OpenTx 2.20 firmware? I believe the sign on the required inputs and build were inverted on the adc_driver.cpp file. However, I am unable to find this file under the OpenTx 2.20 taranis folder. TIA :)

Post Reply

Return to “General help (FrSky Taranis radio)”