What Receivers work with the Taranis
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
What Receivers work with the Taranis
This is a moving target, but the aim it to keep a list of all receivers that work with the FrSky Taranis radio.
Currently compiled from the list on this page:
http://www.frsky-rc.com/Products.asp?Sm ... =17&Page=2
- One Way (no telemetry): Only those capable of being bound to a D mode transmitter.
V8FR-II
V8R7-II
V8R4-II
VD5M
- Two way (telemetry enabled): All models.
D8R-XP
D8R-II plus
D6FR
D4R-II
D8R (discontinued)
D8R(V2)(discontinued)
D8R-II(discontinued)
D8RSP(discontinued)
D4FR (discontinued)
Currently compiled from the list on this page:
http://www.frsky-rc.com/Products.asp?Sm ... =17&Page=2
- One Way (no telemetry): Only those capable of being bound to a D mode transmitter.
V8FR-II
V8R7-II
V8R4-II
VD5M
- Two way (telemetry enabled): All models.
D8R-XP
D8R-II plus
D6FR
D4R-II
D8R (discontinued)
D8R(V2)(discontinued)
D8R-II(discontinued)
D8RSP(discontinued)
D4FR (discontinued)
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: What Receivers work with the Taranis
I believe currently, the "V" series will not work with the internal XJT module, but would work with an external module.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: What Receivers work with the Taranis
I just added a little description.
The V series -II are OK, as they can be bound to a D mode transmitter. Only the original V series won't work.
The V series -II are OK, as they can be bound to a D mode transmitter. Only the original V series won't work.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: What Receivers work with the Taranis
To add some confusion... the v5dm is a d series Protocol, but not a version 2 tx!
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: What Receivers work with the Taranis
Yeah... Well, at least it has a D in the name
-
- Posts: 27
- Joined: Mon Dec 17, 2012 12:54 pm
- Country: United States
- Location: near Dallas, Texas
Re: What Receivers work with the Taranis
And, of course, this is just with the onboard (built in) TX board, no module in the bay,right?
When you add a module in the bay, changes the compatability list to what is also compatible with that TX module (Futaba, other FRSky, FlySky, etc.).
Cheers,
Wreno
When you add a module in the bay, changes the compatability list to what is also compatible with that TX module (Futaba, other FRSky, FlySky, etc.).
Cheers,
Wreno
Re: What Receivers work with the Taranis
Yes of course.
Sent via mobile
Sent via mobile
Re: What Receivers work with the Taranis
Does anyone know which RXs if any can have the F/S set from the TX
Re: What Receivers work with the Taranis
The new X series.
Re: What Receivers work with the Taranis
So only the D8R-XP currently ?
- Redbrickman
- Posts: 219
- Joined: Tue Dec 27, 2011 9:43 pm
- Country: -
Re: What Receivers work with the Taranis
Excuse my ignorance but what is F/S?
Maintain thine airspeed.
Lest the ground arise and smite thee!
Lest the ground arise and smite thee!
Re: What Receivers work with the Taranis
No, the D8R-XP is as the name says a "D" series, For that you will need, as Kilrah said above, the new "X" series receivers..
I wonder if frsky is going to release firmware updates for the existing "D" series modules and receivers that will allow them to become "X" series.. I think that was planned before? is it still planned?
That would be wonderful for people that already own the "D" system. It would be bad if we had to bin all the frsky system to buy a new frsky system, having to buy all the receivers again..
I wonder if frsky is going to release firmware updates for the existing "D" series modules and receivers that will allow them to become "X" series.. I think that was planned before? is it still planned?
That would be wonderful for people that already own the "D" system. It would be bad if we had to bin all the frsky system to buy a new frsky system, having to buy all the receivers again..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: What Receivers work with the Taranis
The D series work. It is just the failsafe that cannot be set from the Tx.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: What Receivers work with the Taranis
The D series work perfectly, they just don't have the new features.jhsa wrote:It would be bad if we had to bin all the frsky system to buy a new frsky system, having to buy all the receivers again..
Re: What Receivers work with the Taranis
but I remember that it was said that there would be an update for the D series allowing them to have some of the features of the "X" series..
So, if I understand they declined that idea right? No point on having PXX on the 9x if that is the case then?
João
So, if I understand they declined that idea right? No point on having PXX on the 9x if that is the case then?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: What Receivers work with the Taranis
I think it goes the other way:
- It was initially planned to keep the existing D hardware, add PXX to the firmware, and only add model match and remote failsafe setting as new features, i.e. little improvement.
- In then end they chose to go much further, and thus create new hardware altogether instead.
No idea if an upgrade of D gear is still planned.
- It was initially planned to keep the existing D hardware, add PXX to the firmware, and only add model match and remote failsafe setting as new features, i.e. little improvement.
- In then end they chose to go much further, and thus create new hardware altogether instead.
No idea if an upgrade of D gear is still planned.
Re: What Receivers work with the Taranis
I think they always wanted to do the new hardware but also upgrade the existing system.. at least that was what I read sometime ago..
if they don't release an upgrade, it will really be a shame..
João
if they don't release an upgrade, it will really be a shame..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 19
- Joined: Mon Jul 15, 2013 6:38 am
- Country: -
Re: What Receivers work with the Taranis
Any idea why I can't bind to my D6FRs?? I have no trouble with my 8 channel Rxs. I put the Taranis into bind mode and I just can't get the receiver led to flash. No jumper is called for and I AM holding down the F/S button on power up. I'm following the directions, but no luck.
Anybody??
Anybody??
Re: What Receivers work with the Taranis
I bound two D6FRs last week. I don't remember the details now, but I don't recall having any problems. Are they new? Mine were in use with a 9x before.
-
- Posts: 19
- Joined: Mon Jul 15, 2013 6:38 am
- Country: -
Re: What Receivers work with the Taranis
I was set to D-16 mode instead of D-8. All's good
Re: What Receivers work with the Taranis
Good, glad you solved it!
-
- Posts: 23
- Joined: Sun Jun 09, 2013 7:37 pm
- Country: -
Re: What Receivers work with the Taranis
Hi,
Something to add to this is that only the new X series receivers support the new model match function.
Thanks Martin.
Something to add to this is that only the new X series receivers support the new model match function.
Thanks Martin.
Re: What Receivers work with the Taranis
I have a Taranis and I can't get my V8FRVII to bind I have chosen the D8 in the model as there appears to be no V8 hold the button down on the receiver power up and voila "no green light"
Bad news, good news swapping the fr Sky module to the Taranis is a snap and no rebinding is necessary. I would still, however; like to try to bind one of these to the internal radio for comparison, if nothing else. So do I need to jumper some pins while I hold down the button? I will dig for more documentation, but; if anyone knows off the top please let me know.
Bad news, good news swapping the fr Sky module to the Taranis is a snap and no rebinding is necessary. I would still, however; like to try to bind one of these to the internal radio for comparison, if nothing else. So do I need to jumper some pins while I hold down the button? I will dig for more documentation, but; if anyone knows off the top please let me know.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: What Receivers work with the Taranis
Read the manual for the v8 receiver.
Normally to bind in dual mode. You need to put a jumper on one of the pins.
Sent from my GT-I9300 using Tapatalk 2
Normally to bind in dual mode. You need to put a jumper on one of the pins.
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: What Receivers work with the Taranis
Thanks, always remember to RTFM (read the fine manual), jumping signal on 1 and 2 is the right stuff for me, on to syncing models and field testing.
Re: What Receivers work with the Taranis
This has probably been asked elsewhere but can you power the 8XR from the Smart Port or RSSi connection ?
Re: What Receivers work with the Taranis
RSSI or Sbus is OK, but not the smart port (the trace going through the receiver would be too weak to safely power servos).