I have an original Taranis (one of the first that came into the UK) and currently it is running on Opentx - r2940.
Can I change the firmware to the latest 2.2.1 directly or do I need to go through some intermediate steps?
Thanks for any advice.
Original Taranis to OpenTX 2.2
Re: Original Taranis to OpenTX 2.2
1) Backup current firmware and eeprom with companion 1.52, backup your SD card contents
2) Install companion 2.2.1, select right radio type
3) Read radio settings with it
4) Download and flash radio with firmware 2.2.1
5) Write radio settings
6) Download 2.2 SD card contents and put that on previously wiped card
Firmware cannot upgrade more than 1 "step" so you need to do it with companion.
There will likely be quite a bit of work to do on each model, check everything VERY carefully. 5 year-jump is quite big..
2) Install companion 2.2.1, select right radio type
3) Read radio settings with it
4) Download and flash radio with firmware 2.2.1
5) Write radio settings
6) Download 2.2 SD card contents and put that on previously wiped card
Firmware cannot upgrade more than 1 "step" so you need to do it with companion.
There will likely be quite a bit of work to do on each model, check everything VERY carefully. 5 year-jump is quite big..
Re: Original Taranis to OpenTX 2.2
Thanks for the advice Kilrah.