How to update external XJT Module FW?
- mapes12
- Posts: 138
- Joined: Tue Jul 09, 2013 6:44 am
- Country: United Kingdom
- Location: Lichfield UK
- Contact:
How to update external XJT Module FW?
I have a Taranis XD9 Tx running ErSky9X. For reasons I won't go into I need to fit it with an external XJT module. However, the Taranis Tx FW is the international derivative and the module is EU LBT. I need to flash the module with the international version of the FW. The only HowTo guide I can find is this one: http://thrustworx.com/frsky-xjt-firmwar ... y-9xr-pro/ but that is for the 9XR Pro. Will the same procedure work with the Taranis? Alternatively, I have a FrSky STK ( https://www.frsky-rc.com/product/stk/ ) and wondered if this would do the update via my PC. I don't won't to try it ahead of asking here in case I fry something. TIA
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: How to update external XJT Module FW?
Yes, that guide is OK. The only differences on the Taranis are:
1. Choose the option "Update Ext. SPort"
2. There is no need to turn the power off and on as the Taranis has a soft power switch for the module and turns that on at the correct time.
Mike
1. Choose the option "Update Ext. SPort"
2. There is no need to turn the power off and on as the Taranis has a soft power switch for the module and turns that on at the correct time.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!