Hi all I decided to build a drone and upon completion I decided to copy my old model and simply bind the new receiver . Everything seems ok. So I have 2 models and 2 drones ...but yesterday I noticed I can control either of my 2 drones with either of the 2 models.... even though they are 2 different receivers.. is normal or even a feature when copying a model to use with another drone? Many thanks
Sent from my SM-G920F using Tapatalk
Qx7 copy model
Re: Qx7 copy model
Firstly availability of that functionality depends on the receiver type you're using.
If supported with your combination you need to change the "Receiver no" in the RF settings so each model uses a different one.
If supported with your combination you need to change the "Receiver no" in the RF settings so each model uses a different one.
Re: RE: Re: Qx7 copy model
Thanks all fixedKilrah wrote:Firstly availability of that functionality depends on the receiver type you're using.
If supported with your combination you need to change the "Receiver no" in the RF settings so each model uses a different one.
Sent from my SM-G920F using Tapatalk
Re: RE: Re: Qx7 copy model
I changed the number but now it doesent work. Only when I change it back so there both number 1 they work again as in my first postKilrah wrote:Firstly availability of that functionality depends on the receiver type you're using.
If supported with your combination you need to change the "Receiver no" in the RF settings so each model uses a different one.
Sent from my SM-G920F using Tapatalk
Re: Qx7 copy model
Bind the receiver again with the new receiver number selected..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Qx7 copy model
You obviously need to rebind after changing number.
Re: Qx7 copy model
I'm a complete newb and still learning. Thanks for helping
Sent from my SM-G920F using Tapatalk
Sent from my SM-G920F using Tapatalk