Hi Mike
I have been using ersky_r221e1 on my QX7 for a couple of months without any problems. When programming a Logical Switch sequence I find that when trying to select L1 - L9 in the right hand column that as soon as I scroll to L* it is rapidly cycling through LA_Z_0_9 about 1x per second and the only way to make a selection is to keep hitting the select button until the number I want is randomly selected.
I found it when trying to programme the three line delay switch for reporting low voltage. (example 11 in manual) The right hand column is the only place I can create the fault - works normally when selected in any of the other columns. Also occurs if I select a vacant line and try to enter L* in right column first.
Is this a radio problem or a bug?
Taranis QX7 - Rapid Logical Switch Cycling
-
- Posts: 28
- Joined: Thu Oct 22, 2015 8:40 pm
- Country: New Zealand
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Taranis QX7 - Rapid Logical Switch Cycling
It's a firmware bug! I'll look into fixing it.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Taranis QX7 - Rapid Logical Switch Cycling
OK, I've got the fix, I'll post an update, probably tomorrow. The bug was in the X9D and X12 as well.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Taranis QX7 - Rapid Logical Switch Cycling
Fix posted, "F9" test version.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 28
- Joined: Thu Oct 22, 2015 8:40 pm
- Country: New Zealand
Re: Taranis QX7 - Rapid Logical Switch Cycling
Thanks Mike.
I'll load it up and see how it goes.
I'll load it up and see how it goes.
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Taranis QX7 - Rapid Logical Switch Cycling
There is a bug to do with selecting binding in "f9", use "g1"!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 28
- Joined: Thu Oct 22, 2015 8:40 pm
- Country: New Zealand
Re: Taranis QX7 - Rapid Logical Switch Cycling
OK - will do. The volume bar on the stock screen is a nice addition too. Does the title/label change according to the P1 assignment?