Switches and voices

General Help and support for the Taranis Radio.
Post Reply
bnwgraaf
Posts: 18
Joined: Sun Sep 03, 2017 7:18 am
Country: -

Switches and voices

Post by bnwgraaf »

I have configured my Taranis to control a quadcopter.
2 switches are used to control the flightmodes.

I have configured 6 logical switches, one for every flightmode and attached them to the flightmode channel (channel 5). Each combination of the two switches gives a specific pwm value for the flight controller.

Every Logical switch has also a voice file attached which says the flightmode which is selected.

This all works well, but one thing I do not like.
If I switch rapidly from, for example, Logical switch 1 to Logical switch 3 (that is via Logical switch 2), the voice says the name of Logical switch 2 first and then of Logical switch 3....

Is it possible, if I switch rapidly, only the voice file of the last selected switch will be plaeyd? Perhaps with some kind of delay or so?

Verstuurd vanaf mijn A0001 met Tapatalk


User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Switches and voices

Post by Kilrah »

You can set a Delay to the middle LS.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Switches and voices

Post by jhsa »

Or perhaps he could just delay the voice instead of delaying the mode logical switch?
Maybe could try something like:
New logical switch with the middle position LS as source. L3 as an example..

L6 AND L3 L3 delay 0.3

L6 will be ON when the middle position L. switch is ON but with a delay. Use L6 to trigger the voice.
Like this he doesn't have to delay the switching itself?

João


Sent from my thor using Tapatalk




My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
bnwgraaf
Posts: 18
Joined: Sun Sep 03, 2017 7:18 am
Country: -

Re: Switches and voices

Post by bnwgraaf »

Hello guys!

Tnx for you replies!
I would like to get som delay on the voices, but not on the flight modes (well, on channel five, I have already some delay on the flight modes).

But @jhsa: your idea brought me to the next solution (I don't know if it is exact what you meant, but it works!):

I already had the 6 logical switches (L1 to L6) for the flight modes.

After trying your idea, I came up with 6 more Logical switches (L7 to L12). Those are for the voices.
Logical Switches 1.png
As input I have token the L1 to L6 functions. But L7 to L12 only will be triggered, if the source Logical switch will be on linger than 0.3 seconds.

And these are my Special Functions:
Logical Switches 2.png
So, if I change flightmode, the voice come in after 0.3 seconds. If I switch to the next flightmode within 0.3 seconds, the voice of the last function will not be heard.

Tnx again for your input!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Switches and voices

Post by jhsa »

That is what I thought :)
I haven't used the openTX firmware for quite a long time now but I guessed it would work.
The firmware I use has a dedicated voice menu with all the options, and the delay is one of them..
But good that you solved the problem.. Well done :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “General help (FrSky Taranis radio)”