How to control my arduino project with Taranis Plus X9D

General Help and support for the Taranis Radio.
Post Reply
DanTheCreator
Posts: 1
Joined: Sun Aug 13, 2017 2:15 pm
Country: -

How to control my arduino project with Taranis Plus X9D

Post by DanTheCreator »

I just bought the Taranis Plus X9D. I have never used one of these. I build robotics with the Arduino microcontroller and usually use the NRF24L01 transceiver modules. I didn't get any doc or datasheet with the Taranis and have no idea where to begin. What I want to do is to control several of my wireless projects with the Taranis. Is there a way to control arduino with the Taranis? If so, how do I go about it? Does it work with the NRF24L01 modules? What receivers or transceivers will work with the Taranis Plus X9D? Any help you can give will be much appreciated. Thanks.

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: How to control my arduino project with Taranis Plus X9D

Post by MikeB »

Specifically the Taranis is from FrSky, so you would need a FrSky receiver.

You might, however, like to look at this thread:
https://www.rcgroups.com/forums/showthr ... le/page649.
You may purchase a ready made module, or make your own.
If you make your own, you could well implement any protocol you already use.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Post Reply

Return to “General help (FrSky Taranis radio)”