I can't bind my xsr to taranis plus

General Help and support for the Taranis Radio.
Post Reply
DadoCro
Posts: 2
Joined: Sat Aug 12, 2017 7:01 pm
Country: -

I can't bind my xsr to taranis plus

Post by DadoCro »

Internal XJT flashed with XJT_LBT_build151223.frk
XSR flashed with XSR_LBT-build151118.frk

When I power the xsr in bind mode all i get is solid red and green leds, no bind.

I've opened up taranis to check ribbon cables, all good, tried different bec rx power and all sorts of xjt/xsr fw combos with the same results.

Please help, Appreciated.

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: I can't bind my xsr to taranis plus

Post by MikeB »

Try using a different receiver number in the protocol setup.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
DadoCro
Posts: 2
Joined: Sat Aug 12, 2017 7:01 pm
Country: -

Re: I can't bind my xsr to taranis plus

Post by DadoCro »

I've tried that, unfortunately it didn't work either :(

I've have a new RF modul with non-eu fw on the way, hoping to resolve the issues I'm experiencing with my current 'EU' marked one.

Cross fingers :)
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: I can't bind my xsr to taranis plus

Post by MikeB »

How many different receiver numbers have you tried? If not already tried, test with 1 through to 10.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “General help (FrSky Taranis radio)”