openrcforums

Internal XJT flashed with XJT_LBT_build151223.frk
XSR flashed with XSR_LBT-build151118.frk

When I power the xsr in bind mode all i get is solid red and green leds, no bind.

I've opened up taranis to check ribbon cables, all good, tried different bec rx power and all sorts of xjt/xsr fw combos with the same results.

Please help, Appreciated.

Try using a different receiver number in the protocol setup.

Mike.

I've tried that, unfortunately it didn't work either

I've have a new RF modul with non-eu fw on the way, hoping to resolve the issues I'm experiencing with my current 'EU' marked one.

Cross fingers

How many different receiver numbers have you tried? If not already tried, test with 1 through to 10.

Mike.