Programming a throttle hold with sticky

General Help and support for the Taranis Radio.
Post Reply
debay777
Posts: 17
Joined: Sat Sep 06, 2014 6:24 am
Country: -

Programming a throttle hold with sticky

Post by debay777 »

I looked on the web and found several articles on how to arm my motor(s) via a sticky throttle cut using SH and SF. Every single program failed. I followed videos, forums, photographs of my buddy's Taranis that his programming actually works fine on. I wanted the T-hold to do the following:
-arm with a combination of two switches, one of which is the momentary switch.
-absolutely not be able to arm with the throttle up.

Again, all the programming I found would do one, but not the other. So I started mashing together the logic lines and mixes and I came up with the following. Please, someone tell me if this is too much or if I can do this with less headache. ImageImageImageImage


Sent from my iPhone using Tapatalk Pro

Post Reply

Return to “General help (FrSky Taranis radio)”