Hi!!!!
I bought a buch new frsky Lipo Voltage Sensors The MINI one. Without The Display.
running Open TX 2.2 in my X9D+ and X8R Reciver 8Chan mode
When i search for new Sensors i Only Get ONE value And that value is The Total cell voltedge of the 3s lipo Value CELLS
But i want to have indevidiual cell voltages or at least one and maby the total voltage of the cells. How do i get this to work.
Best Regards Jan //Sweden
Mlvss Lipo Voltage sensor MINI problems
-
- Posts: 4
- Joined: Fri Dec 09, 2016 12:37 am
- Country: Sweden
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Mlvss Lipo Voltage sensor MINI problems
You have to define the sensors as calculated. The 'Custom' are what got discovered as data from the sensor.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
-
- Posts: 4
- Joined: Fri Dec 09, 2016 12:37 am
- Country: Sweden
Re: Mlvss Lipo Voltage sensor MINI problems
Thanks for a quick anwser...
Now it works,.... but is the separat cell values always calculated.
and not Realtime from cell to cell....
Example if 1 cell in 3.50 and a notther cell is 3.52 the calculated cell volt is 3.51v insted of showing the Real live value of a cell
Now it works,.... but is the separat cell values always calculated.
and not Realtime from cell to cell....
Example if 1 cell in 3.50 and a notther cell is 3.52 the calculated cell volt is 3.51v insted of showing the Real live value of a cell
Re: Mlvss Lipo Voltage sensor MINI problems
This is realtime measurement.
Re: Mlvss Lipo Voltage sensor MINI problems
Hi, have just received a few of the Minis (MLVSS). Was a little surprised when the same widget screen display process in battcheck as for FLVSS did not work, just reports FLVSS not found (true of course, but I expected the telemetry input to Horus to be the same and that the only difference was the absence of an on sensor display so OpenTX would work the same). I can display Cel total so sensor operational.
Can I get the same changing colour total and individual cell display as with a FLVSS and if so how please?
Can I get the same changing colour total and individual cell display as with a FLVSS and if so how please?
Re: Mlvss Lipo Voltage sensor MINI problems
I believe the widget looks for the sensor name (Cels), so don't change it after discovery.
Re: Mlvss Lipo Voltage sensor MINI problems
Hello,
I have just posted similar question of how to setup single cell voltages, read this post and still not sure where to start never mind what to do.
Am using an X9D and new to taranis and well sorry but this makes no sense at all can someone explain please.
Many thank imk
I have just posted similar question of how to setup single cell voltages, read this post and still not sure where to start never mind what to do.
Am using an X9D and new to taranis and well sorry but this makes no sense at all can someone explain please.
Many thank imk