Mlvss Lipo Voltage sensor MINI problems

General Help and support for the Taranis Radio.
Post Reply
lightface79
Posts: 4
Joined: Fri Dec 09, 2016 12:37 am
Country: Sweden

Mlvss Lipo Voltage sensor MINI problems

Post by lightface79 »

Hi!!!!
I bought a buch new frsky Lipo Voltage Sensors The MINI one. Without The Display.
running Open TX 2.2 in my X9D+ and X8R Reciver 8Chan mode
When i search for new Sensors i Only Get ONE value And that value is The Total cell voltedge of the 3s lipo Value CELLS
But i want to have indevidiual cell voltages or at least one and maby the total voltage of the cells. How do i get this to work.
Best Regards Jan //Sweden

rdeanchurch
Posts: 750
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: Mlvss Lipo Voltage sensor MINI problems

Post by rdeanchurch »

You have to define the sensors as calculated. The 'Custom' are what got discovered as data from the sensor.
CalculatedValues.PNG
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
lightface79
Posts: 4
Joined: Fri Dec 09, 2016 12:37 am
Country: Sweden

Re: Mlvss Lipo Voltage sensor MINI problems

Post by lightface79 »

Thanks for a quick anwser...
Now it works,.... but is the separat cell values always calculated.
and not Realtime from cell to cell....
Example if 1 cell in 3.50 and a notther cell is 3.52 the calculated cell volt is 3.51v insted of showing the Real live value of a cell
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Mlvss Lipo Voltage sensor MINI problems

Post by Kilrah »

This is realtime measurement.
BadRaven
Posts: 27
Joined: Wed Jan 22, 2014 7:07 pm
Country: -

Re: Mlvss Lipo Voltage sensor MINI problems

Post by BadRaven »

Hi, have just received a few of the Minis (MLVSS). Was a little surprised when the same widget screen display process in battcheck as for FLVSS did not work, just reports FLVSS not found (true of course, but I expected the telemetry input to Horus to be the same and that the only difference was the absence of an on sensor display so OpenTX would work the same). I can display Cel total so sensor operational.

Can I get the same changing colour total and individual cell display as with a FLVSS and if so how please?

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Mlvss Lipo Voltage sensor MINI problems

Post by Kilrah »

I believe the widget looks for the sensor name (Cels), so don't change it after discovery.
imk
Posts: 7
Joined: Fri Mar 23, 2018 11:33 am
Country: -

Re: Mlvss Lipo Voltage sensor MINI problems

Post by imk »

Hello,
I have just posted similar question of how to setup single cell voltages, read this post and still not sure where to start never mind what to do.
Am using an X9D and new to taranis and well sorry but this makes no sense at all can someone explain please.
Many thank imk
imk
Posts: 7
Joined: Fri Mar 23, 2018 11:33 am
Country: -

Re: Mlvss Lipo Voltage sensor MINI problems

Post by imk »

Found this and works a treat
https://www.youtube.com/watch?v=lORZGjDpZEg
:-)

Post Reply

Return to “General help (FrSky Taranis radio)”