Taranis Plus LCD Problem

[JohnWay]

Hi Guys,
My LCD screen is missing a complete horizontal line of display approx 5mm from the top of the screen. I have seen others have had the same or similar problem and have seen mention of replacing the LCD screen. On Youtube there is a video on replacing a cracked LCD only by separating the replacement LCD from it's backlight - hmmm. I am wary of this and also of the compatibility of the serial no. of the part shown with the Plus. Can somebody please confirm ?

[JohnWay]

Decided to change the LCD with attached back-light rather than messing about. A little tricky de-soldering the component from the board after removing the hot glue but it came off finally with a little persuasion starting at one corner going onto the next pin and moving a little bit at a time. My replacement serial no. 21264-01 : did the job and my Taranis Plus display is now perfect. Happy Days !!