F5J model program check

[Bodenkontakt]

Hi,
this is my first model I programmed to the Taranis. Everything is quite new.
Can anybody check my .eepe for major mistakes before I use it on my model?

The main idea was to create a simple program for my F5J models.
There are flightmodes for Start, Speed, Cruise, Thermal1 and Thermal 2.
I tried to adjust the camber mixes with GV's. Seems to work in the sim...
The butterfly should be activated using the throttle stick. During flight the stick is max up normally and being pulled down for the butterfly function.
The timers are set to start with the first time I start the motor and can be reset using a switch.
The trim of the gas stick is being used to activate voice for the timers.
The motor is on the left side pot...

In the simulator everything looks ok to me, but as a noob on the Taranis a check by a pro would be a great thing...

Thanks in advance, Klaus