Slider switches on Taranis sides ???.

General Help and support for the Taranis Radio.
Post Reply
User avatar
Steve71
Posts: 85
Joined: Sun Jul 07, 2013 7:51 pm
Country: United Kingdom
Location: Leicestershire

Slider switches on Taranis sides ???.

Post by Steve71 » Mon Nov 04, 2013 3:06 pm

Hi all.

As well as flying EP models, I also fly gliders. I would like to assign the spoiler/camber mix to one of the slider switches on the side of the case......but cannot find anything in the switch assignments, that tells you how to use them ??.

Maybe its just an oversight by me........I dunno ?.

I do have spoilers and camber set up on SB and SG........but would prefer one of the sliders

Can anyone help ??.

Thanks,

Steve.
Slope soaring, EP Warbirds and high performance sports models.

"if it ain't broken, you ain't tryin' "

User avatar
Rob Thomson
Site Admin
Posts: 4533
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: Slider switches on Taranis sides ???.

Post by Rob Thomson » Mon Nov 04, 2013 3:11 pm

Its not a switch :-)

It is a bit more like a POT, so you work with it in a different way.

Use the mix source of LS or RS to access them.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
Steve71
Posts: 85
Joined: Sun Jul 07, 2013 7:51 pm
Country: United Kingdom
Location: Leicestershire

Re: Slider switches on Taranis sides ???.

Post by Steve71 » Mon Nov 04, 2013 3:28 pm

Hi Rob.

Thanks for that........on my previous radios, they were known as slider switches !.

Where do I find them in the programming though........I can't see them listed anywhere ?.
Slope soaring, EP Warbirds and high performance sports models.

"if it ain't broken, you ain't tryin' "

User avatar
Rob Thomson
Site Admin
Posts: 4533
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: Slider switches on Taranis sides ???.

Post by Rob Thomson » Mon Nov 04, 2013 3:36 pm

Set your MIX source to LS or RS :-)

e.g. Normally you add a mix with the source of THR, MAX, AIL, etc...

Same place :-)
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
Steve71
Posts: 85
Joined: Sun Jul 07, 2013 7:51 pm
Country: United Kingdom
Location: Leicestershire

Re: Slider switches on Taranis sides ???.

Post by Steve71 » Mon Nov 04, 2013 3:45 pm

found it, many thanks
Slope soaring, EP Warbirds and high performance sports models.

"if it ain't broken, you ain't tryin' "


Daedalus66
Posts: 1656
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Slider switches on Taranis sides ???.

Post by Daedalus66 » Mon Nov 04, 2013 10:04 pm

Steve71 wrote:Hi Rob.

Thanks for that........on my previous radios, they were known as slider switches !.

Where do I find them in the programming though........I can't see them listed anywhere ?.
Never heard them called switches. They've always been sliders any time I've encountered the term.

drummaker
Posts: 6
Joined: Sun Apr 30, 2017 3:32 am
Country: -

Re: Slider switches on Taranis sides ???.

Post by drummaker » Fri May 19, 2017 4:35 pm

Why are RS and LS not supported on TX companion?

jtaylor
Posts: 101
Joined: Fri Nov 01, 2013 1:31 am
Country: -
Location: Wexford (Pittsburgh), PA

Re: Slider switches on Taranis sides ???.

Post by jtaylor » Fri May 19, 2017 11:35 pm

drummaker wrote:
Fri May 19, 2017 4:35 pm
Why are RS and LS not supported on TX companion?
They are and have been for years. What radio and Companion version? And what are you trying to do?

Jim

Post Reply

Return to “General help (FrSky Taranis radio)”

Who is online

Users browsing this forum: No registered users and 2 guests