Hi guys
I have done the 3 x 3 position switches mod and the 6 position pod mod
I have done this mod on my first 9xr pro without any problems
This is now a 2 9xr pro that I used the following YouTube videos for guidance
9XR Pro - 3 Position Switch Modification Part 1 part 2 and part 3
From rctanksau utube videos (there great BTW )
But this radio is giving me grief
The screen will not show any reaction from the 2 switches I have my fingers on in the pic
And as you can see there is a black box around the 2 switches
And the standard pot (not the one I modified ) with my finger on it only does full up or full down in the screen can't get a slow slide on LCD as I turn it
So have I done something wrong
Because the switches I'm having trouble with aren't the ones I upgraded to 3 position switches
Any advice would be great because I'm not sure what to check
Thanks
Vince
9xr pro switch problem
Re: 9xr pro switch problem
For the pot try calibrating sticks and pots in "Radio Setup/Calibration.
It looks like you did something that removed the GND connection from the switches. Make sure all connectors are fully inserted. Measure with the ohm meter if ground is present at the switches.
João
It looks like you did something that removed the GND connection from the switches. Make sure all connectors are fully inserted. Measure with the ohm meter if ground is present at the switches.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW