Turnigy 9xr Pro Telemetry Setup
-
- Posts: 10
- Joined: Fri Feb 03, 2017 10:36 pm
- Country: -
Turnigy 9xr Pro Telemetry Setup
I'm an old man with a new toy. I have recently bought a new Turnigy 9xr Pro (late 2016) and immediately upgraded it to Vers: V. 1760-Mike and SUN: ersky9x-r220. I built a quad and Tarot 680 Pro. I'm using a Naza M V2 with a D8R-ii Plus receiver and DJT radio module for both. I haven't found any menus online that are exactly like mine on the 9xr Pro. Any help would be greatly appreciated with the telemetry settings to indicate a low flight pack voltage. I do not have an external sensor as yet. The D8Rii has the A1 jumper. I don't pretend to understand half of what I just said but I'm trying. Thanks!!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9xr Pro Telemetry Setup
Have a look at the er9x manual here: viewtopic.php?f=5&t=6473#p90349. This should cover most of your questions.
If using the DJT, do you have the cable that connects the telemetry data port to the Futaba trainer socket?
Mike.
If using the DJT, do you have the cable that connects the telemetry data port to the Futaba trainer socket?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Turnigy 9xr Pro Telemetry Setup
Also check out Er9x/Ersky9x Video Tutorials here: (https://www.youtube.com/playlist?list=P ... qcuIqJXhb9).
There is some more info here too: 9XR-Pro Manuals for erSky9x: (viewtopic.php?f=122&t=5575#p79483).
(Note: Being created is an ErSky9x Manual, it is not ready for release yet, so using er9x manual will help for now.)
Bob B.
There is some more info here too: 9XR-Pro Manuals for erSky9x: (viewtopic.php?f=122&t=5575#p79483).
(Note: Being created is an ErSky9x Manual, it is not ready for release yet, so using er9x manual will help for now.)
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 10
- Joined: Fri Feb 03, 2017 10:36 pm
- Country: -
Re: Turnigy 9xr Pro Telemetry Setup
I have the telemetry cable attached to the radio. Thanks for the quick reply. I'll take all the help I can get. I'll read the manual you sent.MikeB wrote:Have a look at the er9x manual here: viewtopic.php?f=5&t=6473#p90349. This should cover most of your questions.
If using the DJT, do you have the cable that connects the telemetry data port to the Futaba trainer socket?
Mike.
-
- Posts: 10
- Joined: Fri Feb 03, 2017 10:36 pm
- Country: -
Re: Turnigy 9xr Pro Telemetry Setup
Thanks for your reply. I'm studying all I can get and have been for awhile. I'm a slow learner but persistent. Now that I have learned how to ask questions on the forum maybe I can do better. Can I submit pictures of the radio menus for clarification?bob195558 wrote:Also check out Er9x/Ersky9x Video Tutorials here: (https://www.youtube.com/playlist?list=P ... qcuIqJXhb9).
There is some more info here too: 9XR-Pro Manuals for erSky9x: (viewtopic.php?f=122&t=5575#p79483).
(Note: Being created is an ErSky9x Manual, it is not ready for release yet, so using er9x manual will help for now.)
Bob B.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Turnigy 9xr Pro Telemetry Setup
Yes, pictures are welcome.stilllearning wrote: Can I submit pictures of the radio menus for clarification?
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).