Implementation of RF remote control 8 Channel Rx

[Rahul]

Hello everyone,

Can anyone help me how can we implement RF remotecontrol 8 channel receiver interface with PPM.
Thank you

[Crucial]

I think you need to provide a little more information.

[Rahul]

Implementation of wireless interface for a moving system

Several components of a system, which shall move independently in future, are connected to each other with a CAN-bus to exchange data. The further development shall add wireless compenents to the system:

1. Implementation of a RF remote control 8 channel receiver interface with PPM.
This shall allow to control the system during development and in case of
emergency with commercial RF-controllers.

2. Implementation of a RF receiver and transmitter for secure data-exchange
In „normal operation“ the system shall receive position points and move indepently. Relevant data shall be transmitted to the base station.

3. Implementation of a GPS receiver
This module shall allow to improve the tracking capabilities of the system.

4. Connection of selected modules to a microcontroller (dsPIC33, on breadboard)
5. Programming the microcontroller’s interface to the modules in C-language
6. Design of PCB-layout of the HF-components.


this is my the project...