Taranis X9D low SWR but low range?

[NJTech]

Hi guys,
Interesting problem here. I recently added a RPSMA extension to my X9D.
Anyway, all has been fine and working great. I recently did a lot of fly (as in travelling) with my gear in a suitcase. Since getting back ive had some low RSSI warnings at no more than 100 meters away in clean LOS. Now whats interesting is the SWR is still 0-1 and the connections are all good that i can see and checked with multimeter. So what is likely to have happened here? In range test mode i can confirm there is RSSI warnings at only 15 paces away and this is across several models so its not an RX issue. Any ideas??
If there is nothing i can do then i guess ill be buying a new backboard with internal RF but im clinging onto hope there might be a fix or something to check you could suggest?
Thanks in advance!
NJ

[NJTech]

further to this, my cheapest option would probably be to get one of these. Sorry if this is a stupid question but does this introduce latency? Or will This just work as the internal one does?

https://www.t9hobbysport.com/frsky-xjt- ... ter-module

[MikeB]

It works like the internal one, no extra latency.

Mike.

[NJTech]

Ok thanks mike, ill go with one of those for now i think. I see banggood do the best deal on a backboard with XJF internal module. I presume i can install this and flash with EULBT?

[kanzuyos]

HI NJTech,

I absolutely got the same problem with you.
lower than 100 meters range with 0 swr !

I wonder what was your solution in your case, is it work well ?
San you share me some more experience? Im so nervous and got headache in my every fly, everyday.

Thank you.