Ty setting the scaler, but leave the "Dest" entry alone please.
Mike.
Turnigy 9Xtreme, XJT, and Telemetry
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9Xtreme, XJT, and Telemetry
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9Xtreme, XJT, and Telemetry
With the Scaler set as on the previous page with "Dest" left as default, The battery remaining % works fine.
However, alt displays 0.0 now for the entire flight.
Galt functions though.
However, alt displays 0.0 now for the entire flight.
Galt functions though.
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9Xtreme, XJT, and Telemetry
I cannot see why setting a scaler should have such an effect. If you look at the logging menu, currently received telemetry items are indicated by a tick at the right of the display. With Alt displaying 0.0 (I assume it normally displays a proper value), is there a tick beside it in the logging menu?
If not, try setting the scaler back to the default values when it is not in use and see if you then get a tick.
Mike.
If not, try setting the scaler back to the default values when it is not in use and see if you then get a tick.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9Xtreme, XJT, and Telemetry
When I remove the scaler settings, normal function returns just as with the other issue.
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9Xtreme, XJT, and Telemetry
I think I need to ask you to change the scaler settings, one value at a time, and see what causes the problem(s).
So first, just set the source to "Mah" and test.
Then set the name to "mAh" and test, and so on.
Also, possibly try using a different scaler (8 instead of 1).
Mike.
So first, just set the source to "Mah" and test.
Then set the name to "mAh" and test, and so on.
Also, possibly try using a different scaler (8 instead of 1).
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9Xtreme, XJT, and Telemetry
I will give that a shot as soon as I can - Thanks