Arming changed sticks

[bgpoppatow]

The other day I unpluged my life battery to charge it and when I replaced it and went out to fly my hexa the arm and disarm function has changed from the left throttle stick to the right stick?????? Mode 2 it functions the same but on the right stick. Any ideas what happened and how to fix. Turnigy 9x with 9xtreme board....thanks

[jhsa]

Is the throttle still on the left stick or did it also move to the right?

João

[bgpoppatow]

Still on left stick. I should also note that it got sideways on me and flipped and the throttle had no response. The only way I could stop it was to unplug the battery.

[jhsa]

That is very strange.. please download your radio's eeprom to eepskye, save it to your computer, put it in a zip file and post it here so we can have a look at your settings.

João

[bgpoppatow]

Here is my eepromhttp://openrcforums.com/forum/download/file.php?mode=view&id=13758&sid=aca73b3f3077dfb0409e089932caaaae

[jhsa]

Go to the mixer and check the channel order there is the same as on the flight controller.
Did you do some change on your flight controller just before you charged the radio battery?
I think the problem is on your flight controller. Or perhaps you changed the channel order in the mixer?

Also, go to the main screen that show the "Bars". This shows the channels outputs.. Do the right channels move when you move the corresponding stick?

João

[bgpoppatow]

Thanks for all your help jhsa... I went to my flight controller(apm 2.6) and sticks all seem good, however, I cant calibrate my esc's anymore with throttle up plug in battery snd move to off...dont have the 3 beeps to inform me its a 3s,,and I cant get into my terminal, t st keeps spitting out code and params so I cant factory reset(mission planner) Have I bricked my apm somehow?

[jhsa]

Ok, will let someone that uses the APM answer this. I never used it.

João