FS-TH9x Schematics and FCC papers

Cant get your radio to work? General Hardware issues?
Post Reply
User avatar
erazz
9x Developer
Posts: 682
Joined: Tue Dec 27, 2011 6:25 pm
Country: -
Location: NJ-USA
Contact:

FS-TH9x Schematics and FCC papers

Post by erazz » Fri Jan 13, 2012 5:04 pm

This comes up once in a while so I thought I'd plonk the link here so we have it for posterity.

The FCCID is: VPOFLYSKY002
FCC GRANT OF EQUIPMENT AUTHORIZATION: https://fjallfoss.fcc.gov/oetcf/tcb/rep ... OFLYSKY002
OET EXHIBIT LIST: https://fjallfoss.fcc.gov/oetcf/eas/rep ... YSKY002%27


Schematics: https://fjallfoss.fcc.gov/eas/GetApplic ... ?id=860408

There are other radios produced by Flysky. To look those up simply search with the mfg being flysky and they'll all jump up.
9xSchematics.pdf
(96.97 KiB) Downloaded 3963 times
Z

BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!

butchalline
Posts: 29
Joined: Wed Mar 13, 2013 11:24 pm
Country: -

Re: FS-TH9x Schematics and FCC papers

Post by butchalline » Wed Mar 13, 2013 11:56 pm

All links broken or non-functional on 13 Mar 2013.
Get error as follows:\

Message from the NSAPI plugin:

No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.

User avatar
ShowMaster
Posts: 4109
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Fri Mar 15, 2013 3:36 pm

Ok, I see that it's posted already above. I'll leave it here anyway as a backup.

http://th9x.googlecode.com/svn/trunk/do ... mitter.pdf
SM


Sent from my iPod touch using Tapatalk.

tedbmoss
Posts: 112
Joined: Sun Jul 15, 2012 10:42 pm
Country: -
Location: Phoenix, AZ

Re: FS-TH9x Schematics and FCC papers

Post by tedbmoss » Sun May 12, 2013 8:23 pm

This is one of the most usful posts for those that break their Tx.

User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: FS-TH9x Schematics and FCC papers

Post by Flaps 30 » Thu Jun 13, 2013 5:36 pm

Has anyone got a more recent schematic that shows the circuitry associated with the 3.3Volt regulator that seems to be missing from the schematic in the opening post?


User avatar
ShowMaster
Posts: 4109
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Thu Jun 13, 2013 6:42 pm

Check your pm's flaps 30. It may help


Sent from my iPod touch using Tapatalk.

User avatar
MikeB
9x Developer
Posts: 14480
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset

Re: FS-TH9x Schematics and FCC papers

Post by MikeB » Thu Jun 13, 2013 9:20 pm

Have you got a copy of the circuit as produced by Gruvin?
I can re-post it if not.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
ShowMaster
Posts: 4109
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Thu Jun 13, 2013 9:27 pm

MikeB wrote:Have you got a copy of the circuit as produced by Gruvin?
I can re-post it if not.

Mike.
I PM'd her a link Mike. I wasn't sure Gruvin wanted it still passed around on the forums? It's been a year or 2.
I'm sure everyone new could use it if it ok to do so.


Sent from my iPod touch using Tapatalk.

User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: FS-TH9x Schematics and FCC papers

Post by Flaps 30 » Thu Jun 13, 2013 9:46 pm

Thanks ShowMaster. Sadly that link doesn't seem to be active.

Mike - I would be grateful for a copy. The one that I have has in red the comment about the 78L05 pinout not being correct on the drawing. I cannot see anything of the 3.3Volt regulator on the drawings.

User avatar
ShowMaster
Posts: 4109
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Thu Jun 13, 2013 10:05 pm

Humm, doesn't work?
Tonight when I get home I can save it as a PDF and email it if Mike doesn't post it.
Does this help?
ImageUploadedByTapatalk1371161105.450122.jpg

Sent from my iPod touch using Tapatalk.

User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: FS-TH9x Schematics and FCC papers

Post by Flaps 30 » Thu Jun 13, 2013 10:23 pm

Cheers.. Now that is interesting. My schematic (which is the same as the one in the first post in this instance) shows pin 15 on u103/P8 connected to +5Volts. All the other components that are connected to U3 also go to +5Volts.

Yes it would help. :)

User avatar
MikeB
9x Developer
Posts: 14480
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset

Re: FS-TH9x Schematics and FCC papers

Post by MikeB » Thu Jun 13, 2013 10:57 pm

I think they used a 5V version of the LCD initially, then changed to a 3.3V version. This needed the 3.3V regulator and potential dividers in all the LCD signals.

Here is Gruvin's circuit diagram:
gruvin9x_v2_actual.pdf
(111.42 KiB) Downloaded 1269 times
Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

RFDave
Posts: 1
Joined: Sat Aug 29, 2015 5:08 pm
Country: -

Re: FS-TH9x Schematics and FCC papers

Post by RFDave » Sat Aug 29, 2015 5:15 pm

Hello All

Here is the Schematic for TURNIGY 9X. Enjoy
Attachments
Turnigy 9X Service Manual.pdf
(90.5 KiB) Downloaded 435 times

kmargos
Posts: 11
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: FS-TH9x Schematics and FCC papers

Post by kmargos » Mon Jun 05, 2017 8:05 pm

TKS Dave!!!

Post Reply

Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 11 guests