FS-TH9x Schematics and FCC papers

Cant get your radio to work? General Hardware issues?
Post Reply
User avatar
erazz
9x Developer
Posts: 682
Joined: Tue Dec 27, 2011 6:25 pm
Country: -
Location: NJ-USA
Contact:

FS-TH9x Schematics and FCC papers

Post by erazz » Fri Jan 13, 2012 5:04 pm

This comes up once in a while so I thought I'd plonk the link here so we have it for posterity.

The FCCID is: VPOFLYSKY002
FCC GRANT OF EQUIPMENT AUTHORIZATION: https://fjallfoss.fcc.gov/oetcf/tcb/rep ... OFLYSKY002
OET EXHIBIT LIST: https://fjallfoss.fcc.gov/oetcf/eas/rep ... YSKY002%27


Schematics: https://fjallfoss.fcc.gov/eas/GetApplic ... ?id=860408

There are other radios produced by Flysky. To look those up simply search with the mfg being flysky and they'll all jump up.
9xSchematics.pdf
(96.97 KiB) Downloaded 3844 times
Z

BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!

butchalline
Posts: 29
Joined: Wed Mar 13, 2013 11:24 pm
Country: -

Re: FS-TH9x Schematics and FCC papers

Post by butchalline » Wed Mar 13, 2013 11:56 pm

All links broken or non-functional on 13 Mar 2013.
Get error as follows:\

Message from the NSAPI plugin:

No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.

User avatar
ShowMaster
Posts: 4083
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Fri Mar 15, 2013 3:36 pm

Ok, I see that it's posted already above. I'll leave it here anyway as a backup.

http://th9x.googlecode.com/svn/trunk/do ... mitter.pdf
SM


Sent from my iPod touch using Tapatalk.

tedbmoss
Posts: 112
Joined: Sun Jul 15, 2012 10:42 pm
Country: -
Location: Phoenix, AZ

Re: FS-TH9x Schematics and FCC papers

Post by tedbmoss » Sun May 12, 2013 8:23 pm

This is one of the most usful posts for those that break their Tx.

User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: FS-TH9x Schematics and FCC papers

Post by Flaps 30 » Thu Jun 13, 2013 5:36 pm

Has anyone got a more recent schematic that shows the circuitry associated with the 3.3Volt regulator that seems to be missing from the schematic in the opening post?


User avatar
ShowMaster
Posts: 4083
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Thu Jun 13, 2013 6:42 pm

Check your pm's flaps 30. It may help


Sent from my iPod touch using Tapatalk.

User avatar
MikeB
9x Developer
Posts: 14162
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset

Re: FS-TH9x Schematics and FCC papers

Post by MikeB » Thu Jun 13, 2013 9:20 pm

Have you got a copy of the circuit as produced by Gruvin?
I can re-post it if not.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
ShowMaster
Posts: 4083
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Thu Jun 13, 2013 9:27 pm

MikeB wrote:Have you got a copy of the circuit as produced by Gruvin?
I can re-post it if not.

Mike.
I PM'd her a link Mike. I wasn't sure Gruvin wanted it still passed around on the forums? It's been a year or 2.
I'm sure everyone new could use it if it ok to do so.


Sent from my iPod touch using Tapatalk.

User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: FS-TH9x Schematics and FCC papers

Post by Flaps 30 » Thu Jun 13, 2013 9:46 pm

Thanks ShowMaster. Sadly that link doesn't seem to be active.

Mike - I would be grateful for a copy. The one that I have has in red the comment about the 78L05 pinout not being correct on the drawing. I cannot see anything of the 3.3Volt regulator on the drawings.

User avatar
ShowMaster
Posts: 4083
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FS-TH9x Schematics and FCC papers

Post by ShowMaster » Thu Jun 13, 2013 10:05 pm

Humm, doesn't work?
Tonight when I get home I can save it as a PDF and email it if Mike doesn't post it.
Does this help?
ImageUploadedByTapatalk1371161105.450122.jpg

Sent from my iPod touch using Tapatalk.

User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: FS-TH9x Schematics and FCC papers

Post by Flaps 30 » Thu Jun 13, 2013 10:23 pm

Cheers.. Now that is interesting. My schematic (which is the same as the one in the first post in this instance) shows pin 15 on u103/P8 connected to +5Volts. All the other components that are connected to U3 also go to +5Volts.

Yes it would help. :)

User avatar
MikeB
9x Developer
Posts: 14162
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset

Re: FS-TH9x Schematics and FCC papers

Post by MikeB » Thu Jun 13, 2013 10:57 pm

I think they used a 5V version of the LCD initially, then changed to a 3.3V version. This needed the 3.3V regulator and potential dividers in all the LCD signals.

Here is Gruvin's circuit diagram:
gruvin9x_v2_actual.pdf
(111.42 KiB) Downloaded 1223 times
Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

RFDave
Posts: 1
Joined: Sat Aug 29, 2015 5:08 pm
Country: -

Re: FS-TH9x Schematics and FCC papers

Post by RFDave » Sat Aug 29, 2015 5:15 pm

Hello All

Here is the Schematic for TURNIGY 9X. Enjoy
Attachments
Turnigy 9X Service Manual.pdf
(90.5 KiB) Downloaded 377 times

Post Reply

Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests