Transmiter state
Transmiter state
In the stock firmware what does the state of the function exactly do? for instance i see INH, INT, ETC, ACT. What do each of these mean?
- Crashj007
- Posts: 133
- Joined: Tue Jan 31, 2012 11:44 pm
- Country: -
- Location: Raleigh, NC, USA
- Contact:
Re: Transmiter state
Do you have the stock manual? Here is a link to the best appearing one:
http://th9x.googlecode.com/svn/trunk/doc/th9x-en.pdf
http://th9x.googlecode.com/svn/trunk/doc/th9x-en.pdf
Last edited by Crashj007 on Thu Dec 06, 2012 6:57 am, edited 2 times in total.
Reason: Fixed link
Reason: Fixed link
--
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
Re: Transmiter state
Hmm that's the manual for the th9x alternative firmware.
The manual for the stock firmware is here:
Part 1 http://www.hobbyking.com/hobbyking/stor ... 510X47.pdf
Part 2 http://www.hobbyking.com/hobbyking/stor ... 510X33.pdf
The manual for the stock firmware is here:
Part 1 http://www.hobbyking.com/hobbyking/stor ... 510X47.pdf
Part 2 http://www.hobbyking.com/hobbyking/stor ... 510X33.pdf
Re: Transmiter state
That does not appear to be the stock manual. The stock manual is pretty bad. Anyone else no what those functions do exactly?
Re: Transmiter state
Ok . i see it now. Damn thats hard to understand. Whats that got to do with organism?lol
It enables and disables the function.
Thank you.
It enables and disables the function.
Thank you.