Want to use my Hitec Aurora 9 to make a great LR TX.

Cant get your radio to work? General Hardware issues?
Post Reply
NintendCrescendo
Posts: 1
Joined: Sun Feb 11, 2018 4:10 am
Country: United States
Contact:

Want to use my Hitec Aurora 9 to make a great LR TX.

Post by NintendCrescendo »

Hello,

My name is Tyler, and I've been into R/C for over 25 years. I've always had a sort of shoestring budget, and it's taught me a lot about patching together pieces of old equipment to get them to work together.

Basically, I love my Aurora case, switchgear, balance, etc. I want to remove the PCB's and general guts, replace them with something else that gives me more channels (really, I just need a handful of extra on/off channels, ~14 total channels), and run the PPM signal through a UHF (433MHz or 915MHZ) Orange rx RF module.

As far as my main logic board, I have a raspberry pi, an arduino, and also a cheap android tablet (only 5" screen). If I need to, I'll buy an atmega328, but I would kind of like to use something I already have.

Any input is appreciated!

Thanks
Tyler
As we peer upward; starstuff, you and I - born in the belly of a supernova between 6 and 8 billion years ago....and now, here the stardust has reassembled....understands from whence it came, and what it truly is....

Post Reply

Return to “Hardware”