Driver for X10S

Cant get your radio to work? General Hardware issues?
Post Reply
Hjeresen
Posts: 2
Joined: Sun Dec 10, 2017 1:32 pm
Country: -

Driver for X10S

Post by Hjeresen » Sun Dec 10, 2017 1:34 pm

Hi
After my Windows 10 has been updated, I can no longer connect with my Horus X10S!
I do not have an overview of which driver should be installed and maybe that's where the problem is!
Drivers that are now installed:
With Horus turned on:
Frsky X10 mass storage
Produced by: Libwdi
Winusb.sys
WdfColinstaller01011.dll
WinUSBCoInstaller2.dll

With Horus off
STM Device in DFU Mode
Driver STTub30.sys

Best regards
Bo

User avatar
bob195558
Posts: 1836
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Driver for X10S

Post by bob195558 » Mon Dec 11, 2017 4:25 am

I have a lot of stuff not connecting after upgrading Win10, I like win7 better.
ErSky9x on Taranis, Sky9x, 9Xtreme, Er9x on 9x with Smartieparts Programmer with TelemetrEZ Board
(http://openrcforums.com/forum/viewtopic.php?f=95&t=7182).
CR10 3D Printer: (http://openrcforums.com/forum/viewtopic.php?f=85&t=10702)

User avatar
Kilrah
Posts: 9495
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Driver for X10S

Post by Kilrah » Mon Dec 11, 2017 7:08 am

Seems you used Zadig with radio powered on, not powered off. So you nuked a perfectly good storage driver, and didn't install the one needed for flashing.
Uninstall from device manager, removing driver.

User avatar
MikeB
9x Developer
Posts: 15565
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Driver for X10S

Post by MikeB » Mon Dec 11, 2017 9:46 am

I had a Windows 10 (Home) update occur, and at least 4 devices then stopped working. I had to change the drivers back to working ones.
I then found: https://www.howtogeek.com/302595/how-to ... e-drivers/, which I followed, so we will see if they now stay working.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
Kilrah
Posts: 9495
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Driver for X10S

Post by Kilrah » Mon Dec 11, 2017 11:01 am

This seems to be only for the normal "minor update" cycle.
From my experience the major updates every 6 months will reselect the Windows default driver for any device for which it has one whatever you do.

The custom driver is still there so you don't actually need to reinstall it, just reselect it in device manager.

The STM32 dfu bootloader is the only one for which it's an annoyance here.


User avatar
jhsa
Posts: 17724
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Driver for X10S

Post by jhsa » Mon Dec 11, 2017 11:14 am

I think that when windows 7 has no more support I will keep Linux only. I think windows 10 would be just a waste of space on my computer's hard drive :(
Just my 2 cents
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Hjeresen
Posts: 2
Joined: Sun Dec 10, 2017 1:32 pm
Country: -

Re: Driver for X10S

Post by Hjeresen » Mon Dec 11, 2017 11:52 am

Thank you for your many responses, I solved the task by deleting and reinstalling the driver.
Mike thanks for linking to article on how to avoid the problem in the future!
Regards Bo

Post Reply

Return to “Hardware”