X9D +

Cant get your radio to work? General Hardware issues?
Post Reply
Nystedt80
Posts: 3
Joined: Tue Oct 10, 2017 12:57 pm
Country: -

X9D +

Post by Nystedt80 »

I have an ParkZone Sukhoi si 26xp there it is a built in reciver who use Dsm2 and i wounder IF i need an module to my radio to bind those two togheter? Thanks for answers.

User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

X9D +

Post by ShowMaster »

The frsky radio protocol is accst and will not support dsm2 or dsmx without a external dsm2/x module added.
The HK orange module is one option but without the firmware updated, it won’t support/control some of the newer Spektrum umx stabilizing receivers/planes.
MikeB has made available a diy firmware flash in this thread.

Orange Module running a MULTI protocol thread in openrcforums.com


If this is too complicated for you to try, there is a IRangeX 4 in 1 module sold by Banggood that with the latest ersky9x, or opentx 2.2 loaded into your Taranis. It requires no module flashing.



Sent from my iPhone using Tapatalk Pro
Nystedt80
Posts: 3
Joined: Tue Oct 10, 2017 12:57 pm
Country: -

Re: X9D +

Post by Nystedt80 »

Thanks for answer will look at both
Nystedt80
Posts: 3
Joined: Tue Oct 10, 2017 12:57 pm
Country: -

Re: X9D +

Post by Nystedt80 »

:| One question only, i needed to flash the firmware due to radio was non EU and i flashed it so it work and i used opentx program on PC means that i have newest firmware for HK orange all protocols.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9D +

Post by Kilrah »

As was mentioned you need additional hardware, you cannot get other protocols just through software.

Post Reply

Return to “Hardware”