Hello,
On my 9x with the m128 I was setting up a model in er9x and then the screen just went off.
I'm pretty sure that the processor is still workinf fine because I can flash it in eepe. I already tested another screen, but it isn't working.
I have no idea why it isn't working anymore. I don't know if the backight/buzzer are still working because I'm just building a voice model and iI already discounected the backlicht and the buzzer and on the backlight pin I put another switch.
I hope you can help me with my problem.
Thanks for your help
rcfish
LCD screen is blank
Re: LCD screen is blank
Load your eeprom onto eepe and check the display contrast in radio setup. Set it to about 27, burn it back to the radio, and see if you got something on the screen now..
João
Sent from my thor using Tapatalk
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: LCD screen is blank
Thank you sooooo much.
I don't know why the contrast get resettet, but I got my 9x "working" again.
@Mike (or another developer) if it is possible to fix this bug, please fix it.
I don't know why the contrast get resettet, but I got my 9x "working" again.
@Mike (or another developer) if it is possible to fix this bug, please fix it.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: LCD screen is blank
I don't know what the "bug" is!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: LCD screen is blank
I mean that the display contrast just went to 0, while I was setting up a model in er9x. Maybe it's somethink that has nothing to do with er9x. I don't know.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: LCD screen is blank
I'm not aware of this being a general problem. What I would really need is to know what, exactly, you were changing on the model when the contrast got upset, and if this is repeatable.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!